Availability
CHEVROLET Induction
Trick Flow® Billet Aluminum 102mm Drive-by-Wire Throttle Body for GM LS
Dyno and vehicle-tested for reliability and durability on the street or at the track, Trick Flow's billet aluminum 102mm drive-by-wire throttle body is precision CNC-machined to deliver excellent idle control. An upgraded high-torque motor ensures great throttle response and smooth drivability with precise throttle control. Additional enhancements include a Hall-Effect TPS; a heavy-duty return spring for greater safety and long-term reliability; and a high-strength brass throttle blade that's engineered to withstand the rigors of high-boost applications and demanding operating conditions. A corrosion resistant black anodized finish tops off the exterior. The Trick Flow billet aluminum 102mm drive-by-wire throttle body has a GM LS3-style mounting flange and fits a wide variety of intake manifold and water pump combinations for a seamless installation. Gasket and mounting hardware included.
$679.99
Trick Flow® R-Series Intake Manifolds for Small Block Chevrolet
Trick Flow’s R-Series Intake Manifold for Small Block Chevrolet is engineered, dyno proven, and tested to outperform the competition! It all started when Trick Flow saw a void in the market for an ultra high-performance intake manifold for small block Chevy engines. They set their engineers to work, and what they came up with was the R-Series intake manifold—catered to large displacement engines capable of 600 or more horsepower in the 3,500-7,500+ RPM range. While optimized for Trick Flow Super 23® 230cc cylinder heads, this manifold also performs well on engines using any 220cc or larger port heads. Trick Flow’s development team used the latest CAD technology to create a one-piece single plane, spider-type design with a large, open raised floor plenum, paying special attention to maximizing airflow and equalizing air and fuel distribution. The well-balanced flow and minimal restriction are the keys to extracting the most performance available, giving users an edge over the competition. The team also focused on weight reduction by eliminating excess material where possible and casting it in strong yet lightweight A319 aluminum. Trick Flow made sure to leave enough material through the runner walls so the intake can be port matched, or even fully ported for builders wanting to extract every ounce of power from their engines. Integral bosses in each runner can be drilled and tapped for nitrous nozzles.
$479.99
Trick Flow® R-Series Intake Manifolds for Big Block Chevrolet
Trick Flow® R-Series Intake Manifolds for 500-plus cubic inch big block Chevy engines are designed for maximum power delivery between 3,500 and 8,000 rpm—right where it’s needed the most. These single plane, rectangular port intake manifolds feature high-flowing extended runners and raised plenum floors to increase horsepower and torque. Other special features include extra material for custom port work and bosses for nitrous injection. These intake manifolds only fit Dominator-style carbs. On standard deck height engines, the overall height to the carburetor mounting pad is 6.543 in. On tall deck engines, the overall height to the mounting pad is 6.826 in.
$699.99
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$84.99
—
$109.99
Trick Flow® R-Series Carbureted Intake Manifolds for GM LS3
The R-Series intake manifolds by Trick Flow are computer-engineered to deliver carbureted-style aspiration to GM’s LS3 engine. Important features include A319 aluminum construction, a one-piece spider-type design, high-flow individual runners combined with a raised plenum floor, integral bosses for adding nitrous, and extra material for custom porting. These manifolds are intended for heavily modified engines that operate in the 3,500-7,500 plus RPM powerband. For use with Holley 4150-style square bore carburetors; overall height to the mounting pads is 6.285 in.
$479.99
Trick Flow® Phenolic Throttle Body Spacers
With one of these phenolic spacers, you can increase pulling power and enhance throttle response without sacrificing drivability. In addition to improving power and throttle response, these spacers will also increase gas mileage. Each spacer includes all of the necessary gaskets and hardware for an easy installation.
$64.99
—
$79.99
Trick Flow® Intake Gaskets
Trick Flow intake gaskets deliver trouble-free performance over the long haul. Each gasket is made from the highest quality materials to provide superior sealing under extreme pressure and heat. They are ideal for stock to mild performance engine buildups.
$17.99
—
$34.99
Trick Flow® R-Series EFI Intake Manifolds for GM LS3
The R-Series intake manifolds by Trick Flow are computer-engineered to deliver carbureted-style aspiration to GM’s LS3 engine. Important features include A319 aluminum construction, a one-piece spider-type design, high-flow individual runners combined with a raised plenum floor, custom machining for fuel injection nozzles, and extra material for custom porting. These manifolds are intended for heavily modified engines that operate in the 3,500-7,500 plus RPM powerband and will accept standard Bosch and Siemens type fuel injectors. Overall height to the mounting pads is 6.285 in.
$499.99
Trick Flow® TFX™ Cold Air Intake Kits
Trick Flow® TFX™ cold air intake kits replace an engine’s restrictive stock air cleaner or airbox with a black composite, low-restriction unit and reusable cotton-gauze filter that will increase airflow to the engine. And as we all learned in Horsepower 101, more air equals more power. The kits include an air filter assembly, a plenum (where applicable), mounting hardware, and instructions. Manufactured by K&N for Trick Flow
$349.99
Trick Flow® Air Inlet Elbow Installation Kits
Replace worn or damaged parts with these Trick Flow® air inlet elbow installation kits. They include all the hardware that originally came with the Trick Flow® LT1 air inlet elbows.
$49.99
Trick Flow® Air Intake Tubing Couplers
These Trick Flow® air intake couplers allow you to assemble your air intake with ease. They are manufactured from high-quality materials and offered in a choice of sizes and styles to suit your specific needs.
$29.99
—
$34.99
Trick Flow® Replacement LT1 Air Inlet Elbows
In the event that you have to replace the elbow from your Trick Flow® LT1 air inlet elbow kit, we have you covered. These elbows are available in the three original finishes--polished, natural, and black powdercoated, or choose the new black composite polymer design. These are the elbows only; no hardware is included.
$74.99
—
$84.99
Trick Flow® Throttle Body Gaskets
Bring back the performance of your throttle body by eliminating power-robbing air leaks with these genuine Trick Flow® replacement throttle body gaskets.
$19.99
—
$23.99
Trick Flow® Throttle Body Spacer Replacement Components
If you should have to rebuild your Trick Flow® phenolic throttle body spacer, Summit Racing™ has you covered with these Trick Flow® throttle body spacer replacement components.
$39.99
—
$44.99