Availability
1997 Parts and Accessories
Trick Flow® Head Bolt Bushings
Are you looking for a head bolt reducer bushing for your Trick Flow® heads? Then you need a set of these Trick Flow® head bolt bushings. If your block uses a smaller diameter bolt than your head does, then one of these is what you need.
$64.99
Trick Flow® Rocker Arm Studs
Trick Flow® rocker arm studs are ideal for street or competition use. These studs are made from 8740 chromoly steel.
$54.99
—
$89.99
Trick Flow® Valve Spring Compressors
Make valve-train servicing on your engine easier with Trick Flow® valve spring compressors. These specially made tools can remove the valve springs with cylinder heads mounted to the engine block, even on engines already installed in the vehicle. And, they make track changes quicker! Trick Flow® valve spring compressors are a must for servicing valve springs, retainers, camshafts, and valve seals.
$69.99
—
$84.99
Trick Flow® Engine Steam Line Hoses for GM LS
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
$74.99
Trick Flow® Replacement Adjustable Crank Sprockets
In the event that you have to replace the crank sprockets on your Trick Flow® Modular timing chain and gear set, we have you covered. These crank sprockets are machined from billet steel for durability. These crank sprockets are also adjustable for fine-tuning your modular engine.
$74.99
Trick Flow® by Cometic MLS Head Gaskets
These multi-layer steel head gaskets from Trick Flow and Cometic are the best way to seal aftermarket cylinder heads to an engine. With three layers of stainless steel, these gaskets offer better torque retention, less distortion, and better sealing than conventional or composite head gaskets in high horsepower, high cylinder-pressure applications.
$99.99
Trick Flow® R-Series and 351W Intake Manifold Hardware Kits
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
$59.99
Trick Flow® Cam Degree Supplemental Kits
Now you can have perfect timing for your 4.6/5.4L Ford with these Trick Flow® cam degree supplemental kits. These supplemental kits are additional tools that, when used with a Trick Flow® cam degree kit, make degreeing your cam much easier! These Trick Flow® cam degree supplemental kits include a steel plate for the magnetic base, an adjustable set-up lash adjuster, an extension for the dial indicator, and an Allen key.
$54.99
Trick Flow® Cylinder Head Bolt Kits
Keep combustion where it belongs! Trick Flow’s high-quality cylinder head bolt kits provide consistent clamping force to keep cylinder heads in place. The bolts are made from premium quality alloy steel with cold-formed heads and rolled threads, and a premium black oxide finish protects them from wear and corrosion. Each kit contains all the bolts necessary to mount a pair of heads, including hardened washers.
$59.99
—
$94.99
Trick Flow® Rocker Arm Shaft Studs
Stability for your shaft-mounted rocker arms—Trick Flow® shaft studs. These quality replacement studs will support your shaft with strength that will keep your rockers in perfect alignment for high performance. Secure shafts mean stable rockers and a more stable valvetrain, which equals better engine performance. Trick Flow® knows even the small parts can affect how your engine runs; choose their rocker arm shaft studs for your setup.
$64.99
Trick Flow® Rocker Arm Mounting Stands
Trick Flow® offers replacement rocker arm mounting stands with flat rocker pedestals that are reinforced for more rigidity in high-horsepower and boosted vehicles. Because rocker arms are hard-working and vital parts in controlling intake valve operation, a reliable rail foundation is essential. Trick Flow® rocker arm mounting stands are constructed from high-quality materials to ensure longevity and proper function.
$79.99
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$84.99
—
$94.99
Trick Flow® Valve Cover Gaskets
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
$59.99
Trick Flow® 8mm Timing Cover Bolt and Stud Kits for Ford 4.6L/5.4L 2V
Trick Flow® 8mm timing cover bolt and stud kits are designed for Ford 4.6L/5.4L 2V applications. These bolt and stud kits allow you to maintain your factory accessory mounting when used with Trick Flow® Twisted Wedge® 185/195 Series cylinder heads on modular engines originally equipped with 10mm bolts and studs.
$89.99
Trick Flow® Timing Chains
If you're planning any upgrades to your 4.6/5.4L 2 V or 4 V modular engine (such as performance improvement heads), then it's a good time to update your timing chain. Since they're interference engines, timing component wear can ruin your day. That's why Trick Flow® has engineered these replacement timing chains to keep your engine running smoothly.
$94.99
Trick Flow® 4.6 Mustang GT/Cobra Fuel Pressure Sensor Adapters
These Trick Flow® 4.6 Mustang GT/Cobra fuel pressure sensor adapters allow the installation of Trick Flow® fuel rails on 4.6L engines where it is desirable to retain the stock returnless fuel system. They are designed to provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor. They will permit the OE fuel pressure sensor to be remote mounted or coupled directly to the Trick Flow® fuel rail, and they feature -8 AN ORB inlet/outlet ports to create a positive seal and eliminate the need for thread sealant. Keep your OEM fuel pressure sensor with one of these Trick Flow 4.6 Mustang GT/Cobra fuel pressure sensor adapters.
$54.99
Trick Flow® Stainless Steel Intake Manifold Bolt Kits
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
$64.99
—
$74.99
Trick Flow® Valve Cover Accessory Kits
You made an investment with some cool looking Trick Flow® fabricated aluminum valve covers for your ride, so why skimp on the installation hardware? These Trick Flow® valve cover accessory kits are the appropriate attaching hardware for ensuring a correct installation. They will also add the perfect finishing touch to your engine compartment. These kits offer up great performance along with great style.
$84.99
Trick Flow® Valve Guides
These Trick Flow® replacement valve guides are just like the originals. Made from premium materials and built to exacting tolerances, they replace your existing worn or damaged valve guides.
$54.99
—
$94.99
Trick Flow® Pushrod Guideplates
Trick Flow® replacement pushrod guideplates are direct replacements for the pushrods that are included with Trick Flow® heads. These steel guideplates support and stabilize the pushrods so that the rocker arms remain centered on the valves. They feature a black oxide finish and no machining is required.
$54.99
—
$74.99
Trick Flow® Replacement Timing Gears
Trick Flow® replacement timing gears are designed from high quality materials for performance 2 V modular engines. Since they're interference engines, timing component wear can ruin your day. That's why Trick Flow® has engineered these replacement timing gears to keep your engine running smoothly.
$89.99
Trick Flow® A460 18-Bolt Cylinder Head Fastener Conversion Kits
These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the necessary parts to complete the installation of A460 18-bolt cylinder heads. They feature a black oxide finish that protects them from wear and corrosion. These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the following components: * Eight 7/16 in. x 0.660 in. washers * Eight 7/16 in. x 0.813 in. washers * Eight 7/16 in.-20 NF 12-point nuts * Eight 7/16 in. x 2.500 in. studs * Eight 7/16 in. x 1.750 in. 12-point bolts
$69.99
Trick Flow® by Cometic MLS Exhaust Gaskets
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like /Trick Flow® by Cometic MLS exhaust gaskets. Constructed from multiple layers of strong stainless steel, these gaskets have excellent rebound ability and corrosion-resistant characteristics. The outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. These gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
$54.99
Trick Flow® Engine Steam Line 4-Corner Plumbing Kits for GM LS
Plumb all four corners of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes with Trick Flow®. Your 4-corner plumbing kits include: * Two 2 ft. 1/4 in. black rubber hoses * Twelve 9/16 in. hose clamps * Four 4 AN 90 degree fittings * Stainless steel tee barb fitting * Stainless steel cross barb fitting
$64.99