Availability
FORD Parts and Accessories
Trick Flow® Hydraulic Lifters and Lash Adjusters
Trick Flow® hydraulic lifters and lash adjusters are the perfect choice to freshen up your engine during a cam swap. These affordable lifters and adjusters are designed to factory tolerances for a perfect fit and provide precise oil control to keep your engine running smoothly. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods.
$814.99
Trick Flow® R-Series Tunnel Wedge Intake Manifold for Ford 390-428
Ford FE fans know that when it comes to building a Ford FE engine, nostalgia and horsepower go hand-in-hand. One classic manifold that has never gone out of style is the rare Tunnel Wedge intake. It was a landmark design 50 years ago, but Trick Flow knew that with some modern ingenuity and manufacturing know-how they could make it even better. So Trick Flow’s high performance engineers went to work and the R-Series Tunnel Wedge Intake Manifold for Ford 390-428 was born. Part of the original Tunnel Wedge’s cool factor was its appearance, so Trick Flow took special care to match the looks of the legendary OEM version while maintaining the original carburetor locations. On the inside, Trick Flow made noticeable improvements to the port design while also incorporating a much-needed O-ringed sealed bottom plate. Cast in premium grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-type square bore carburetors. Mounting hardware is included.
$999.99
Trick Flow® Track Heat® EFI Intake Manifolds for Ford 5.0L
Trick Flow's® Track Heat® EFI Intake Manifolds are computer-engineered to deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The manifolds improve airflow velocity and performance in the 1,500 to 6,500 RPM range. Trick Flow® Track Heat® EFI Intake Manifolds are available in kits with a natural finish aluminum lower manifold and an A319 aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. The manifolds have a 75mm throttle body inlet and are designed for use on non-EGR engines. Additional features include: *Small cross-section with 12.200 in. runners *Overall height to the upper manifold flange is 10.200 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.000 in. x 1.200 in. port size at mating flange The upper plenums and lower manifold are also available separately.
$892.99
Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 4.6L/5.4L 2V
Improve the performance of Ford 4.6L or 5.4L 2V modular engines with Trick Flow’s® Track Max® Hydraulic Roller Camshafts. These camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances. Includes new 12mm bolts and washers.
$974.99
Trick Flow® Replacement EFI Upper Intake Manifold Plenums for Ford
Trick Flow® EFI upper intake plenums substantially increase airflow and distribute it evenly to all eight cylinders. The plenums are computer-modeled with the proper runner length and cross-sectional taper have been optimized to produce maximum torque and horsepower in the intended application. The castings are made from A319 aluminum so they work well with nitrous and are designed fit under most stock-height hoods. Available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. Must be used with corresponding Trick Flow lower intake manifold base.
$824.99
Trick Flow® High Port® 240 Cylinder Heads for Small Block Ford
High Port® 240 cylinder heads for small block Ford are specifically designed for large cubic inch, large power adder, big shot nitrous oxide, and other mega-power combinations. These heads share many of the same exclusive features of High Port 192 “Fast As Cast” heads—unique valve spacing, raised exhaust runners, extra strong castings, thick decks, superior cooling, reshaped intake runner entries, extra material for porting, raised valve cover rails, and excellent airflow—plus top-of-the-line CNC Competition Ported runners with a high resolution surface finish for maximum airflow and power over the entire rpm range. Cylinder heads are available fully assembled or as bare castings. Sold individually.
$849.99
Trick Flow® Twisted Wedge® 170 Cylinder Heads for Small Block Ford
Trick Flow’s legendary Twisted Wedge 170 series cylinder heads are back and better than ever! The updated A356-T61 machined castings are borrowed from Trick Flow’s 11R series head lineup, bringing with it increased strength thanks to a .625" thick deck and a great-looking, billet-like appearance. The groundbreaking Twisted Wedge combustion chamber moves the intake valves away from the cylinder walls to reduce valve shrouding and significantly enhance high-lift flow. Altered 15° intake/17° exhaust valve angles tighten the combustion chamber to increase compression while improving piston-to-valve clearance. That allows the use of higher lift cams with stock pistons. CNC-profiled combustion chambers with relocated spark plug locations optimize combustion efficiency, extracting more power with less ignition timing and reducing the potential for detonation. The choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners feature a competition level, multi-angle valve job for near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads arrive ready-to-run out of the box with top-quality valvetrain components to ensure great durability and longevity. This includes stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
$849.99
—
$874.99
Trick Flow® Forged Pistons
Trick Flow® forged pistons are specifically designed to work with Trick Flow® Twisted Wedge® and Track Heat® cylinder heads for Chevrolet and Ford engines. These fully skirted, lightweight pistons are precision-machined from premium 2618 aluminum alloy. They perfectly match the unique chamber and valve angles of the Twisted Wedge® heads, making them ideal for more serious engine buildups.
$774.99
Trick Flow® Twisted Wedge® Track Heat® 170 Cylinder Heads for Small Block Ford
Trick Flow’s legendary Twisted Wedge 170 series cylinder heads are back and better than ever! The updated A356-T61 machined castings are borrowed from Trick Flow’s 11R series head lineup, bringing with it increased strength thanks to a .625" thick deck and a great-looking, billet-like appearance. The groundbreaking Twisted Wedge combustion chamber moves the intake valves away from the cylinder walls to reduce valve shrouding and significantly enhance high-lift flow. Altered 15° intake/17° exhaust valve angles tighten the combustion chamber to increase compression while improving piston-to-valve clearance. That allows the use of higher lift cams with stock pistons. CNC-profiled combustion chambers with relocated spark plug locations optimize combustion efficiency, extracting more power with less ignition timing and reducing the potential for detonation. The choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners feature a competition level, multi-angle valve job for near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads arrive ready-to-run out of the box with top-quality valvetrain components to ensure great durability and longevity. This includes stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
$874.99
Trick Flow® TFX™ EFI Fuel Rail Kits
These Trick Flow® TFX™ fuel rail kits come with everything you need to feed a high performance EFI engine--billet fuel rails, fittings, hoses, brackets, and a fuel pressure regulator. The regulator is adjustable from 40 to 70 psi for precise fuel delivery.
$813.99
Trick Flow® R-Series EFI Intake Manifolds for Ford 5.0L
Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The manifolds have long, large cross-section runners to further improve flow velocity and performance. Trick Flow® R-Series EFI Intake Manifolds are available in kits with a natural finish aluminum lower manifold and an A319 aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. Manifolds for 5.0L engines with a 75mm throttle body inlet produce power in the 2,500-7,250 RPM range. Manifolds for 90mm throttle body applications produce power in the 3,000-7,750 RPM range. Additional features include: *Large cross-section with 12.000 in. runners *Overall height to the upper manifold flange is 11.000 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.
$794.99
—
$859.99
Trick Flow® High Port® 225 Cylinder Heads for Small Block Ford
High Port® 225 cylinder heads for small block Ford are specifically designed for large cubic inch, large power adder, big shot nitrous oxide, and other mega-power combinations. These heads share many of the same exclusive features of High Port 192 “Fast As Cast” heads—unique valve spacing, raised exhaust runners, extra strong castings, thick decks, superior cooling, reshaped intake runner entries, extra material for porting, raised valve cover rails, and excellent airflow—plus top-of-the-line CNC Competition Ported runners with a high resolution surface finish for maximum airflow and power over the entire rpm range. Cylinder heads are available fully assembled or as bare castings. Sold individually.
$849.99
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds for Ford 429/460
The R-Series A460 Tunnel Ram Intake Manifolds are ideal for all 8,000 plus rpm applications such as drag racing or tractor pulling. These manifolds feature a 2-piece design. The lower manifold attaches to the engine block and is made from thick-wall A319 aluminum for durability and feature bosses for nitrous and fuel injection nozzles. The interchangeable A319 aluminum top covers allow mounting of either single or dual Dominator-style carbs. Both the lower manifold and a top cover must be purchased to make a complete intake manifold. Over height of the lower manifold to the top of carburetor mounting pad with the single carb top is 13.040 in. The overall height of the lower manifold with the dual carb top is 10.415 in. These R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
$849.99
Trick Flow® Header Build Kits
Trick Flow® header build kits contain high-quality 304 stainless steel components with a natural finish for long-lasting good looks and unbeatable performance. These kits are not prefabricated weld-up parts like many others on the market; they're for automotive enthusiasts who want to build their own stainless steel headers. Only the header flanges and collectors are prefab, leaving the creativity in the hands of the builder. Each kit includes laser-cut flanges, J-bends, collectors, and filler diamonds to connect the tubes together. The construction possibilities are endless with a Trick Flow® header build kit.
$986.99
—
$999.99
Trick Flow® High Port® 192 Cylinder Heads for Small Block Ford
Trick Flow High Port® 192 cylinder heads for small block Ford are one of the most dominant aftermarket heads in racing. They feature unique valve spacing, .750" raised exhaust runners, extra strong castings and thick decks for additional rigidity and gasket integrity, superior cooling characteristics, and most importantly, excellent airflow. And that’s not all! The entry into the intake runner has been reshaped to help seal the area along the port roof and thicker port walls increase strength and provide more material for porting. Plus, interlocking ductile iron seats are used to handle the stresses of high heat, high horsepower applications. Other features include fully CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), raised valve cover rails, and large Fast As Cast® runners that duplicate the profiles of CNC-ported heads to create ultra high-flowing heads without costly CNC-porting. Cylinder heads are available fully assembled or as bare castings. Sold individually.
$799.99
Trick Flow® PowerPort® Forged Pistons for Ford Clevor
Trick Flow® PowerPort® forged pistons for Ford Clevor engines are an extremely strong, yet lightweight piston choice for your head swap. Trick Flow's® lightweight forged pistons are fully skirted and precision-machined from premium 2618 aluminum alloy. They have been engineered to work in Ford Windsor engine blocks that have the better flowing 351 Cleveland-style cylinder heads and are offered in different bores and compression ratios. Oversized valve reliefs provide extra clearance, and the precision fit wrist pins and Spirolox retainers keep everything together. Help your ride realize its full horsepower potential with these Trick Flow® PowerPort® forged pistons for Ford Clevors.
$774.99