Availability
CHEVROLET Parts and Accessories
Trick Flow® Hydraulic Lifters and Lash Adjusters
Trick Flow® hydraulic lifters and lash adjusters are the perfect choice to freshen up your engine during a cam swap. These affordable lifters and adjusters are designed to factory tolerances for a perfect fit and provide precise oil control to keep your engine running smoothly. The retro-fit roller lifters with vertical-style link bars are designed for a roller cam conversion in engines originally equipped with a hydraulic flat tappet cam. Overhead valve engines may require different length pushrods.
$109.99
—
$223.84
Trick Flow® Engine Steam Line Plumbing Kits for GM LS
Your modified LS-powered cars and trucks will be easier to service with an upgrade to a race car plumbing system. These plumbing kits contain black anodized billet aluminum fittings, O-rings, stainless steel bolts, and all of the necessary hose to plumb just the front of the heads or all four corners. Choose the most desirable upgrade to your factory steam tubes--Trick Flow® engine steam line plumbing kits for GM LS.
$111.82
—
$150.95
Trick Flow® Transmission Pans
Trick Flow® transmission pans hold between one to three extra quarts of fluid (depending on application) and are finned to help the transmission dissipate heat faster for maximum efficiency. Made from A319 cast aluminum for lightweight and durability, the pans come complete with mounting bolts, drain plug, filter extension, and a new gasket (where applicable).
$209.99
—
$229.99
Trick Flow® Billet Steel Timing Sets
Trick Flow® billet steel timing sets will provide accurate, reliable timing thanks to the billet steel gears and a double roller timing chain. They come with a 3-position or 9-position keyway that allows you to run the cam straight-up, retarded, or advanced.
$109.99
—
$159.99
Trick Flow® Track Max® Camshafts for Small Block Chevrolet
Trick Flow® Track Max® camshafts for small block Chevrolet engines are designed and dyno-tested to ensure maximum performance. They are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow performance throughout the engine's powerband. Hydraulic flat tappet and hydraulic roller grinds are available.
$249.99
Trick Flow® Replacement Valves
Don’t cut corners when it’s time to replace or upgrade the valves in your Trick Flow® cylinder heads. These replacement valves are the same high quality units used in Trick Flow® assembled heads. They feature stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). Available for all Trick Flow® cylinder heads.
$199.99
—
$239.99
Trick Flow® by PAC Racing Dual Valve Springs
Trick Flow by PAC Racing Dual Valve Springs are manufactured to Trick Flow’s rigorous, world-class standards. Every spring is CNC coiled from high tensile-strength, extra-durable Pacaloy™ chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability criteria. These dual PAC springs are specifically designed for cams with aggressive profiles, and are available with damper coils for extra spring surge prevention.
$159.99
—
$199.99
Trick Flow® Standard Engine Gasket Sets
Trick Flow’s standard engine gasket sets will help your engine rebuild go smoothly. These complete sets include every gasket your stock rebuild or performance build-up needs in one package: cylinder heads, water and oil pumps, timing cover, distributor (where applicable), thermostat, and oil pan plus gaskets for the headers and intake manifolds that accommodate larger ports.
$104.99
—
$139.99
Trick Flow® Cylinder Head Bolt Kits
Keep combustion where it belongs! Trick Flow’s high-quality cylinder head bolt kits provide consistent clamping force to keep cylinder heads in place. The bolts are made from premium quality alloy steel with cold-formed heads and rolled threads, and a premium black oxide finish protects them from wear and corrosion. Each kit contains all the bolts necessary to mount a pair of heads, including hardened washers.
$139.99
—
$199.99
Trick Flow® Premium Engine Gasket Sets
Seal-up your performance engine the right way with a Trick Flow premium engine gasket set. They include all of the gaskets you need like steel core head gaskets with copper or steel wire combustion seals (depending on application), composite intake gaskets with end seals, steel core laminate header gaskets, and gaskets for the water and oil pumps, timing cover, distributor (where applicable), thermostat, oil pan, and other gaskets specific to the application.
$139.99
—
$159.99
Trick Flow® LS Series Retrofit Trunnion Kits
The OE rocker arm bearing design is a proven weak link in high-performance LS engines because the bearings are unable to cope with high lift cams, higher valve spring pressures, and sustained high-RPM use. Plus, the uncaptured design allows the needle rollers to be ejected into the crankcase, potentially causing catastrophic engine damage. One way to fix these issues is with a full set of high-quality roller rocker arms. However, many builders prefer the lower cost and lightweight durability of stock rocker bodies. That's where Trick Flow's far less costly solution comes in. The Trick Flow® rocker arm trunnion upgrade kit includes 16 CNC-machined trunnions that are heat-treated and precision ground to tighter tolerances for reduced wear and significantly improved rocker arm control. Precision needle roller bearings withstand high performance cams, valve springs, and repeated high-RPM blasts. They are held captive by extra wide circlips to prevent the bearing walk-out problem of the OE design. The Trick Flow® trunnion installation kit takes all the hassle out of removing old trunnions and installing new ones, with easy installation using just a bench vise instead of a cumbersome hydraulic press like other kits. Best of all, no modification are required to the OE rocker arms to use these upgrade and installation kits! Features Include: • CNC Machined Trunnion - Heat Treated & Precision Ground • Tighter Tolerance & Radial Clearance • Captivated bearing for reliability • Designed for higher stresses and high RPM use • Improved rocker and valve control
$169.99
Trick Flow® by Cometic MLS Head Gaskets
These multi-layer steel head gaskets from Trick Flow and Cometic are the best way to seal aftermarket cylinder heads to an engine. With three layers of stainless steel, these gaskets offer better torque retention, less distortion, and better sealing than conventional or composite head gaskets in high horsepower, high cylinder-pressure applications.
$104.99
—
$109.99
Trick Flow® Flywheel Holding Tools for GM LS
Torque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you properly torque down your harmonic balancer bolt. These tools are designed to work on engines mounted to an engine service stand or an engine already installed in the vehicle. They are even slotted, so they can be used on LS engines that have been swapped into older vehicles utilizing flywheel spacers!
$109.99
Trick Flow® Premium Head Gasket Sets
Save money for other upgrades by purchasing only the gaskets you need for a cylinder head swap or reseal with a Trick Flow premium head gasket set. The sets include steel core head gaskets, composite intake gaskets with end seals, steel core laminate exhaust gaskets, and premium valve cover gaskets.
$109.99
Trick Flow® Valve Cover Adapters for Small Chevrolet
These Trick Flow® valve cover adapters allow you to run early-style valve covers with your late model Chevrolet's centerbolt heads. Plus, the adapters give you the option of running a stud girdle to increase valvetrain stability and improve overall performance. The adapters come with all necessary hardware and gaskets.
$149.99
Trick Flow® Track Max® Harmonic Dampers
Put Trick Flow’s advanced engineering to work on your engine and reap the benefits! Trick Flow® Track Max® SFI-18.1 rated, carbon steel harmonic dampers feature an injection-molded and bonded elastomer and engraved timing marks for easy adjustment. The corrosion-resistant black painted finish provides good looks and long-lasting durability.
$249.99
Trick Flow® Rocker Stud Girdles for Chevy
These Trick Flow® rocker stud girdles for Chevy are CNC-machined and help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized blue and comes with high-quality mounting hardware and hardened adjusting nuts. Tall-style valve covers are required.
$229.99
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$109.99
Trick Flow® TFX™ Fuel Injectors
With electronically drilled and machined disc-type fuel control valves, plus improved nozzles and coil windings, Trick Flow TFX™ fuel injectors atomize fuel better, resist clogging, are quieter, and require less energy to operate than other aftermarket injectors. The features don’t stop there. Low magnetic stainless steel injector bodies prevent corrosion from underhood contaminates and seal the injectors from moisture contamination. OEM-style clip grooves secure the injectors to fuel rails and eliminate possible fuel leaks. Viton® fluoroelastomer O-rings seal the injectors to the fuel rails and intake manifold to prevent fuel and air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX fuel injectors are 100% duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
$104.99
Trick Flow® Billet Ignition Coil Brackets
Trick Flow® billet aluminum coil brackets are designed for use with Trick Flow® LS billet valve covers. Threaded mounting holes make coil installation and swaps quick and easy, and the universal fit supports all popular LS coils, including IGN-1A smart coils. Includes mounting hardware; coils and valve covers sold separately.
$149.99