Availability
Intake Manifolds
Trick Flow® R-Series Carbureted Intake Manifolds for Small Block Ford
Trick Flow® R-Series Intake Manifolds for small block Ford are designed for maximum power delivery in heavily modified street/strip and race engines that operate in the 3,500-7,500 plus rpm range—right where it’s needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. Overall height to the Holley 4150-style carburetor mounting pad on 5.0L/302 engines 6.225 in.; overall height for 351W engines is 6.429 in.
$479.99
—
$499.99
Trick Flow® R-Series Intake Manifolds for Small Block Chevrolet
Trick Flow’s R-Series Intake Manifold for Small Block Chevrolet is engineered, dyno proven, and tested to outperform the competition! It all started when Trick Flow saw a void in the market for an ultra high-performance intake manifold for small block Chevy engines. They set their engineers to work, and what they came up with was the R-Series intake manifold—catered to large displacement engines capable of 600 or more horsepower in the 3,500-7,500+ RPM range. While optimized for Trick Flow Super 23® 230cc cylinder heads, this manifold also performs well on engines using any 220cc or larger port heads. Trick Flow’s development team used the latest CAD technology to create a one-piece single plane, spider-type design with a large, open raised floor plenum, paying special attention to maximizing airflow and equalizing air and fuel distribution. The well-balanced flow and minimal restriction are the keys to extracting the most performance available, giving users an edge over the competition. The team also focused on weight reduction by eliminating excess material where possible and casting it in strong yet lightweight A319 aluminum. Trick Flow made sure to leave enough material through the runner walls so the intake can be port matched, or even fully ported for builders wanting to extract every ounce of power from their engines. Integral bosses in each runner can be drilled and tapped for nitrous nozzles.
$479.99
Trick Flow® R-Series 11R 227 Port-Matched Carbureted Intake Manifolds
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Integral bosses allow adding nitrous nozzles. Accepts Holley 4150-style square bore carburetors.
$679.99
Trick Flow® R-Series Intake Manifolds for Big Block Chevrolet
Trick Flow® R-Series Intake Manifolds for 500-plus cubic inch big block Chevy engines are designed for maximum power delivery between 3,500 and 8,000 rpm—right where it’s needed the most. These single plane, rectangular port intake manifolds feature high-flowing extended runners and raised plenum floors to increase horsepower and torque. Other special features include extra material for custom port work and bosses for nitrous injection. These intake manifolds only fit Dominator-style carbs. On standard deck height engines, the overall height to the carburetor mounting pad is 6.543 in. On tall deck engines, the overall height to the mounting pad is 6.826 in.
$699.99
Trick Flow® Track Heat® Intake Manifolds for Ford 351C and Clevor
Trick Flow® Track Heat® Intake Manifolds for Ford 351C and Windsor-based Clevor-style engines are designed for street/strip applications. These single plane manifolds feature a high-rise, one-piece spider design with high-flowing, individual extended runners for significant horsepower and torque increases in the 3,000-7,000 rpm range. A raised plenum floor increases flow velocity and fuel atomization. Additional features include OE 2V port locations and dimensions, A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. The manifolds have a Holley 4150-style carburetor mounting pad and work in all 2V and 4V applications. Overall height to the carburetor mounting pads for part numbers TFS-51600111 and TFS-51600113 is 6.370 in. Overall mounting pad height for part number TFS-51600112 is 6.561 in.
$479.99
Trick Flow® R-Series and 351W Intake Manifold Hardware Kits
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
$59.99
Trick Flow® R-Series Carb-Style EFI Intake Manifolds for Small Block Ford
Trick Flow® R-Series single plane intake manifolds for small block Ford are designed for maximum power delivery in the 3,500-7,500 plus RPM range on heavily modified street/strip and race engines. Features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. The manifolds accept standard Bosch or Siemens type fuel injectors. The port size at the head flange is 2.100 in. x 1.280 in., but they can be port matched as large as 2.250 in. x 1.400 in. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
$499.99
—
$529.99
Trick Flow® EFI Heat Spacer Kits
CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit between the upper and lower intakes to create a heat flow barrier. This keeps the air in the upper intake cooler and denser. In addition, they will allow the use of taller valve covers by raising the height of the upper intake manifold. The EFI heat spacers are available in 3/8 in. and 1 in. thick versions; gaskets and longer mounting bolts are also included.
$89.99
—
$179.99
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds for Ford 429/460
The R-Series A460 Tunnel Ram Intake Manifolds are ideal for all 8,000 plus rpm applications such as drag racing or tractor pulling. These manifolds feature a 2-piece design. The lower manifold attaches to the engine block and is made from thick-wall A319 aluminum for durability and feature bosses for nitrous and fuel injection nozzles. The interchangeable A319 aluminum top covers allow mounting of either single or dual Dominator-style carbs. Both the lower manifold and a top cover must be purchased to make a complete intake manifold. Over height of the lower manifold to the top of carburetor mounting pad with the single carb top is 13.040 in. The overall height of the lower manifold with the dual carb top is 10.415 in. These R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
$849.99
Trick Flow® R-Series 11R 205 Port-Matched Carbureted Intake Manifolds
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carbureted intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Integral bosses allow adding nitrous nozzles. These manifolds accept Holley 4150-style square bore carburetors.
$679.99
Trick Flow® R-Series 11R 227 Port-Matched Fuel Injected Intake Manifolds
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.
$729.99
Trick Flow® R-Series 11R 205 Port-Matched Fuel Injected Intake Manifolds
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.
$729.99
Trick Flow® Box-R-Series Upper Intake Manifold Hardware Kits
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
$54.99
Trick Flow® 4.6L Lower Intake Manifold Hardware Kits
These Trick Flow® 4.6L Lower intake manifold hardware kits include all the hardware you need for your Trick Flow® manifold. Kits include: * Two socket head cap screws M8 x 1.25 x 75mm * Nine hex flange bolts M8 x 1.25 x 35mm * Two 3/8 NPT plugs * One gasket sheet TFS-51800002-G * Twelve hex flange bolts M6 x 1.0 x 25mm * Four #8 x 3/4 in. self tapping screws * Four zip ties * One hose barb C-rings * One 5/8 in. ID x 48 in. 90 degree coolant tube * One 12 in. black nylon hose protector * One 1 1/2 in. ID formed upper radiator hose extension * One 1 1/2 in. ID aluminum hose connector * One 12 in. 19/32 in. ID PCV hose (Romeo Engines)* * One 12 in. 11/32 in. ID PCV hose (Windsor Engines)* * Two 14 in. 1/4 in. fuel injection hoses * Four fuel injection hose clamps * Two thermal hose protectors * Two 5/8 in. hose clamps * Two 1 1/2 in. hose clamps * One 1/2 NPT x 3/4 in. barb fitting * One EGR extension tube * One 5/8 in. 90 degree steel compression fitting * Two hex flange bolts M8 x 1.25 x 20mm * Two M8 flat washers * One alternator relocation kit TFS-5182ALTR
$239.99
Trick Flow® 5.0L Street EFI NOS Hardware Kits
These Trick Flow® 5.0L Street EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Four 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 in. long 12 pt. bolts * Two TFS Street/Track Heat upper/lower flange gaskets * Four 5/16 x 2 5/8 in. long studs
$44.99
Trick Flow® 5.0L R-Series EFI NOS Hardware Kits
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
$54.99
Trick Flow® 5.0L Box-R-Series EFI NOS Hardware Kits
These Trick Flow® 5.0L Box R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Six 5/16-24NF 12 pt. nuts * Two 12 pt. bolts 5/16-18 x 7 in. long * Two TFS R-Series upper/lower flange gaskets * Six 5/16 x 2 in. long studs * Ten 1/4-20 x 1 1/4 in. long button head screws * One flange plate gasket
$44.99