Availability
Trick Flow Specialties Parts and Accessories
Trick Flow® Throttle Cable Brackets
Trick Flow® makes your carb installation look clean and professional. Installation is easy--just attach these brackets to the base of your carburetor. All of the hardware that you need is included, along with a return spring. The brackets are compatible with most carburetor designs and transmission kickdown cables (except Dominators).
$96.99
Trick Flow® Rocker Arm Studs
Trick Flow® rocker arm studs are ideal for street or competition use. These studs are made from 8740 chromoly steel.
$52.99
—
$99.99
Trick Flow® Valve Spring Compressors
Make valve-train servicing on your engine easier with Trick Flow® valve spring compressors. These specially made tools can remove the valve springs with cylinder heads mounted to the engine block, even on engines already installed in the vehicle. And, they make track changes quicker! Trick Flow® valve spring compressors are a must for servicing valve springs, retainers, camshafts, and valve seals.
$69.99
—
$83.99
Trick Flow® Engine Steam Line Hoses for GM LS
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
$72.99
Trick Flow® Chromoly Pushrods
The proper length pushrod is critical to achieving correct valvetrain geometry. Trick Flow one-piece chromoly pushrods are available in a variety of lengths for use with all high performance applications. The pushrods are cold-formed from 4130 chromoly steel with a .080" wall thickness for strength and durability. Plus, the oil hole is closed to within .040" then drilled and chamfered to .093" to eliminate stress fractures and cracks before being induction-hardened and heat-treated for use with guideplates. These pushrods are available in 5/16" diameter in any length from 6.250"-9.000" and in 3/8" diameter between 7.650"-9.950" in .050" increments.
$77.99
Trick Flow® Replacement Adjustable Crank Sprockets
In the event that you have to replace the crank sprockets on your Trick Flow® Modular timing chain and gear set, we have you covered. These crank sprockets are machined from billet steel for durability. These crank sprockets are also adjustable for fine-tuning your modular engine.
$70.99
Trick Flow® Head Bolt Bushings
Are you looking for a head bolt reducer bushing for your Trick Flow® heads? Then you need a set of these Trick Flow® head bolt bushings. If your block uses a smaller diameter bolt than your head does, then one of these is what you need.
$59.99
Trick Flow® Rocker Arm Shaft Studs
Stability for your shaft-mounted rocker arms—Trick Flow® shaft studs. These quality replacement studs will support your shaft with strength that will keep your rockers in perfect alignment for high performance. Secure shafts mean stable rockers and a more stable valvetrain, which equals better engine performance. Trick Flow® knows even the small parts can affect how your engine runs; choose their rocker arm shaft studs for your setup.
$62.99
—
$63.99
Trick Flow® Steel Valve Spring Retainers
Trick Flow® steel valve spring retainers are made from hardened 4140 chromoly steel for great performance characteristics and reliability. On top of that, they're black-oxide coated for corrosion protection and good looks. They install at standard height and there are versions available for single or double springs and 7 or 10 degree valve stem locks.
$50.99
—
$95.99
Trick Flow® Timing Chain Dampeners
Trick Flow® timing chain dampeners provide a small amount of tension on the timing chain to keep it from "whipping" on gear changes. They are manufactured from durable OE plastic and include the necessary mounting bracket. The dampeners are designed for use on Chevrolet LS2 and LS3 Series engines without VVT (variable valve timing).
$61.98
Trick Flow® Cam Degree Supplemental Kits
Now you can have perfect timing for your 4.6/5.4L Ford with these Trick Flow® cam degree supplemental kits. These supplemental kits are additional tools that, when used with a Trick Flow® cam degree kit, make degreeing your cam much easier! These Trick Flow® cam degree supplemental kits include a steel plate for the magnetic base, an adjustable set-up lash adjuster, an extension for the dial indicator, and an Allen key.
$52.99
Trick Flow® High-Flow Electric Fuel Pumps
Multi-port EFI systems need a stable fuel supply at any rpm, and Trick Flow® high-pressure, high-flow electric fuel pumps will do the job. Trick Flow® high-flow pumps also have 5/16 in. inlets and outlets, brass stud terminals for secure connections, and two cushioned clamps for inline mounting.
$94.99
Trick Flow® by Cometic MLS Head Gaskets
These multi-layer steel head gaskets from Trick Flow and Cometic are the best way to seal aftermarket cylinder heads to an engine. With three layers of stainless steel, these gaskets offer better torque retention, less distortion, and better sealing than conventional or composite head gaskets in high horsepower, high cylinder-pressure applications.
$91.99
—
$98.99
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$82.99
—
$92.99
Trick Flow® StreetBurner® and Track Heat® Intake Manifold Hardware Kits
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
$50.99
Trick Flow® Rocker Arm Mounting Stands
Trick Flow® offers replacement rocker arm mounting stands with flat rocker pedestals that are reinforced for more rigidity in high-horsepower and boosted vehicles. Because rocker arms are hard-working and vital parts in controlling intake valve operation, a reliable rail foundation is essential. Trick Flow® rocker arm mounting stands are constructed from high-quality materials to ensure longevity and proper function.
$72.99
Trick Flow® Billet Oil Fill Kits
These great looking Trick Flow® oil fill kits are specially made to work with small block EFI Fords with Trick Flow® short valve covers. Made from billet aluminum, they come with a vacuum fitting, O-ring cap, and clear corrosion-resistant finish for long life.
$79.99
Trick Flow® Standard Engine Gasket Sets
Trick Flow’s standard engine gasket sets will help your engine rebuild go smoothly. These complete sets include every gasket your stock rebuild or performance build-up needs in one package: cylinder heads, water and oil pumps, timing cover, distributor (where applicable), thermostat, and oil pan plus gaskets for the headers and intake manifolds that accommodate larger ports.
$96.99
Trick Flow® Deluxe Cartridge Roll Porting Kits
Trick Flow® deluxe cartridge roll porting kits have what you need for cleaning up ports and chambers on cast iron or aluminum heads. They include four 60-grit cartridge rolls, forty 80-grit rolls, and forty 120-grit rolls, all in assorted sizes, plus two 1/4 in. shank mandrels and a durable plastic storage box.
$73.99
Trick Flow® TFX™ Canister Fuel Filters
Trick Flow® TFX™ billet aluminum, high-flow canister style fuel filter can handle the pressures of the most extreme high performance carbureted or fuel injected fuel system. The lightweight filter assembly flows 1,500 lbs./hr. of fuel with less than 1 psi of pressure drop through its 3/8 in. NPT inlet and outlet fittings. The maximum fuel pressure rating is a whopping 2,000 psi! A 10-micron replaceable filter element and chrome-plated mounting hardware are included.
$99.99
Trick Flow® EFI Heat Spacer Kits
CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit between the upper and lower intakes to create a heat flow barrier. This keeps the air in the upper intake cooler and denser. In addition, they will allow the use of taller valve covers by raising the height of the upper intake manifold. The EFI heat spacers are available in 3/8 in. and 1 in. thick versions; gaskets and longer mounting bolts are also included.
$64.99
—
$99.99
Trick Flow® Cylinder Head Bolt Kits
Keep combustion where it belongs! Trick Flow’s high-quality cylinder head bolt kits provide consistent clamping force to keep cylinder heads in place. The bolts are made from premium quality alloy steel with cold-formed heads and rolled threads, and a premium black oxide finish protects them from wear and corrosion. Each kit contains all the bolts necessary to mount a pair of heads, including hardened washers.
$59.99
—
$87.99
Trick Flow® Valve Guides
These Trick Flow® replacement valve guides are just like the originals. Made from premium materials and built to exacting tolerances, they replace your existing worn or damaged valve guides.
$50.99
—
$94.99
Trick Flow® Valve Cover Gaskets
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
$54.99
—
$57.99