Availability
Trick Flow Specialties Intake Manifolds
Trick Flow® R-Series Tunnel Wedge Intake Manifold for Ford 390-428
Ford FE fans know that when it comes to building a Ford FE engine, nostalgia and horsepower go hand-in-hand. One classic manifold that has never gone out of style is the rare Tunnel Wedge intake. It was a landmark design 50 years ago, but Trick Flow knew that with some modern ingenuity and manufacturing know-how they could make it even better. So Trick Flow’s high performance engineers went to work and the R-Series Tunnel Wedge Intake Manifold for Ford 390-428 was born. Part of the original Tunnel Wedge’s cool factor was its appearance, so Trick Flow took special care to match the looks of the legendary OEM version while maintaining the original carburetor locations. On the inside, Trick Flow made noticeable improvements to the port design while also incorporating a much-needed O-ringed sealed bottom plate. Cast in premium grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-type square bore carburetors. Mounting hardware is included.
$999.99
Trick Flow® Track Heat® EFI Intake Manifolds for Ford 5.0L
Trick Flow's® Track Heat® EFI Intake Manifolds are computer-engineered to deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The manifolds improve airflow velocity and performance in the 1,500 to 6,500 RPM range. Trick Flow® Track Heat® EFI Intake Manifolds are available in kits with a natural finish aluminum lower manifold and an A319 aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. The manifolds have a 75mm throttle body inlet and are designed for use on non-EGR engines. Additional features include: *Small cross-section with 12.200 in. runners *Overall height to the upper manifold flange is 10.200 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.000 in. x 1.200 in. port size at mating flange The upper plenums and lower manifold are also available separately.
$892.99
Trick Flow® Replacement EFI Upper Intake Manifold Plenums for Ford
Trick Flow® EFI upper intake plenums substantially increase airflow and distribute it evenly to all eight cylinders. The plenums are computer-modeled with the proper runner length and cross-sectional taper have been optimized to produce maximum torque and horsepower in the intended application. The castings are made from A319 aluminum so they work well with nitrous and are designed fit under most stock-height hoods. Available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. Must be used with corresponding Trick Flow lower intake manifold base.
$824.99
Trick Flow® R-Series EFI Intake Manifolds for Ford 5.0L
Trick Flow’s® R-Series EFI Intake Manifolds are computer-engineered to deliver ideal airflow distribution and velocity to increase low-end torque and provide superior high-rpm horsepower. The manifolds have long, large cross-section runners to further improve flow velocity and performance. Trick Flow® R-Series EFI Intake Manifolds are available in kits with a natural finish aluminum lower manifold and an A319 aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. Manifolds for 5.0L engines with a 75mm throttle body inlet produce power in the 2,500-7,250 RPM range. Manifolds for 90mm throttle body applications produce power in the 3,000-7,750 RPM range. Additional features include: *Large cross-section with 12.000 in. runners *Overall height to the upper manifold flange is 11.000 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.
$794.99
—
$859.99
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds for Ford 429/460
The R-Series A460 Tunnel Ram Intake Manifolds are ideal for all 8,000 plus rpm applications such as drag racing or tractor pulling. These manifolds feature a 2-piece design. The lower manifold attaches to the engine block and is made from thick-wall A319 aluminum for durability and feature bosses for nitrous and fuel injection nozzles. The interchangeable A319 aluminum top covers allow mounting of either single or dual Dominator-style carbs. Both the lower manifold and a top cover must be purchased to make a complete intake manifold. Over height of the lower manifold to the top of carburetor mounting pad with the single carb top is 13.040 in. The overall height of the lower manifold with the dual carb top is 10.415 in. These R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
$849.99