Availability
Trick Flow Specialties Valve Covers
Trick Flow® Valve Cover Stud Kits
Secure your Trick Flow® valve covers with one of these valve cover stud kits. They're available for standard and tall-height covers and include the studs and nuts.
$29.99
—
$39.99
Trick Flow® Cast Aluminum Valve Covers
Made from durable A319 aluminum, Trick Flow® cast aluminum valve covers not only look great, they are much less prone to flex and distortion than factory stamped steel or plastic covers. That eliminates cracking and helps prevent oil leaks. Stock height valve covers clear roller rocker arms; tall height valve covers clear roller rocker arms and rocker stud girdles. Valve covers for Ford 4.6L/5.4L 2V engines include a baffled PCV connection plus baffled and threaded fresh air connections for forced induction applications. The covers fit engines with left or right side oil fill.
$129.99
—
$249.99
Trick Flow® Cast Aluminum Valve Covers for Ford 429/460
Trick Flow® tall height valve covers clear roller rocker arms and stud girdles. Their durable cast aluminum construction makes them much less prone to flex and distortion than stamped steel covers, which helps prevent oil leaks. A raised area inside each cover end allows for a baffle plate to be added when using non-baffled crankcase breathers and grommets, and a raised Trick Flow® logo shows everyone that you take high performance seriously.
$399.99
—
$419.99
Trick Flow® Billet Oil Fill Kits
These great looking Trick Flow® oil fill kits are specially made to work with small block EFI Fords with Trick Flow® short valve covers. Made from billet aluminum, they come with a vacuum fitting, O-ring cap, and clear corrosion-resistant finish for long life.
$84.99
Trick Flow® Valve Cover Gaskets
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
$34.99
—
$59.99
Trick Flow® Chrome Valve Covers
Trick Flow® chrome plated valve covers are a great alternative to higher priced aluminum covers. They’re baffled to prevent oil breather blow-by (except small block Ford) and feature embossed Trick Flow® logos, triple chrome plating, and new gaskets.
$54.99
Trick Flow® Valve Cover Oil Fill Caps
Put the finishing touch on your engine with Trick Flow® billet aluminum oil fill caps. Designed to help seal your engine from dirt and outside contaminants, these premium caps are available in both push-in styles that fit the included grommet and threaded versions for compatible valve covers. Oil fill caps are available with or without a Trick Flow® logo on the top come in natural aluminum or durable black anodized finishes, these caps deliver the perfect combination of function, durability, and underhood style.
$13.99
—
$29.99
Trick Flow® PCV Valve Kits
Need to replace some PCV components? Trick Flow® PCV valve kits come with a valve, rubber grommet, and a new filter screen. Installation is easy with the direct fit of these components. Allow for proper ventilation, increased fuel economy, and reduced emissions with Trick Flow® PCV valve kits.
$39.99
Trick Flow® Billet Aluminum Valve Covers for GM LS
Trick Flow® billet valve covers are precision CNC machined in the USA from 6061-T6 aluminum and finished in durable black anodizing for a clean, high-end appearance. Designed with added clearance for shaft mount roller rocker arm systems, they are compatible with stock and aftermarket GM cylinder heads. An integrated oil drip rail helps reduce leaks while also aiding alignment during installation and removal. Driver and passenger side -12AN O-ring ports provide flexibility for crankcase ventilation systems, including catch cans and vacuum pump setups, while the included dyno-tested high-flow baffle system promotes efficient crankcase ventilation and minimizes oil vapor escaping through the PCV system. The baffle system is shipped uninstalled, allowing for additional valvetrain clearance or alternate PCV configurations when required. Each set includes a billet oil cap, stainless steel hardware, and uses factory-style gaskets for a secure, reliable seal. Optional universal coil mounting brackets fit GM LS and many aftermarket coils, or allow for remote mounting for a cleaner engine bay.
$899.99
—
$1,024.99
Trick Flow® Cast Aluminum Valve Covers for Ford 351C, 351M/400, and Clevor
Trick Flow® tall height valve covers clear roller rocker arms and stud girdles. Their durable cast aluminum construction makes them much less prone to flex and distortion than stamped steel covers, which helps prevent oil leaks. A raised area inside each cover end allows for a baffle plate to be added when using non-baffled crankcase breathers and grommets, and a raised Trick Flow® logo shows everyone that you take high performance seriously.
$269.99
—
$289.99
Trick Flow® Valve Cover Breathers
These Trick Flow® valve cover breathers are built around an efficient, pretreated cotton/gauze filter element that protects your engine and lets it breathe freely. The breathers feature chrome tops that have the Trick Flow® logo embossed on them. These push-in breathers are available with either shielded or unshielded elements.
$5.99
—
$14.99
Trick Flow® Oil Vapor Tank Components
An outstanding selection of Trick Flow® oil vapor tank components is available to help pre-clean crankcase ventilation gases before allowing them into the intake manifold. Single and dual billet aluminum separator kits include the black anodized tanks, hoses, and limiting fittings, while clamp-on breather fittings and attachments attach to the valve cover breather opening to reduce the amount of oil vapor vented from the crankcase. Get the components you need from the engine experts at Trick Flow®.
$29.99
—
$109.99
Trick Flow® Valve Cover Adapters for Small Chevrolet
These Trick Flow® valve cover adapters allow you to run early-style valve covers with your late model Chevrolet's centerbolt heads. Plus, the adapters give you the option of running a stud girdle to increase valvetrain stability and improve overall performance. The adapters come with all necessary hardware and gaskets.
$149.99
Trick Flow® Valve Cover Accessory Kits
You made an investment with some cool looking Trick Flow® fabricated aluminum valve covers for your ride, so why skimp on the installation hardware? These Trick Flow® valve cover accessory kits are the appropriate attaching hardware for ensuring a correct installation. They will also add the perfect finishing touch to your engine compartment. These kits offer up great performance along with great style.
$39.99
—
$84.99
Trick Flow® Cast Aluminum Valve Cover Kits for Ford 4.6L/5.4L 2V
Trick Flow® lightweight cast aluminum valve covers for Ford 4.6L/5.4L 2V engines are more durable and eliminate the cracking and distortion issues that plague the factory plastic covers. Unique design features include a baffled PCV connection plus baffled and threaded fresh air connections for forced induction applications. The valve cover kits fit vehicles with left- or right-side oil fill and come complete with OE-style gaskets, bolts, bolt seals, and two filler caps.
$329.99
—
$349.99
Trick Flow® Oil Vapor Line Limiting Breather Fittings
Keep those valve covers running clean! Trick Flow® oil vapor line limiting breather fittings can prevent grime and fumes from making their way into your intake. They will help keep harmful fumes from degrading your valve performance, and maintain your engine's optimal operating conditions. These fittings are available for different lines and engine models. Find the best fit for your engine and get your valves breathing right today.
$29.99
Trick Flow® PCV Valve Cover Baffle and PCV Upgrade Kits
Trick Flow® valve cover baffle and PCV upgrade kits are designed to install larger-style baffle plates and updated PCVs to existing Trick Flow® valve covers with riveted baffle plates. The use of these kits will increase oil vapor control through your vehicle's breather system.
$29.99
—
$49.99
Trick Flow® Valve Cover Bolts
These Trick Flow® valve cover bolts not only keep your valve covers securely fastened, but they also do it with great style. They're made of high-quality grade steel and have a black oxide finish to offer up lasting performance and stylish good looks.
$13.99
—
$29.99
Trick Flow® Weld-On Oil Filler Tubes
Accessorize your valve covers with Trick Flow® weld-on oil filler tubes. Made from premium billet aluminum, these filler tubes offer great performance and high style--the perfect finishing touch to your engine compartment! Tubes are available in short and tall styles to fit your application. Make a statement under the hood with beautiful billet--add Trick Flow® weld-on oil filler tubes to your valve covers.
$16.99
—
$23.99
Trick Flow® Fabricated Aluminum Valve Covers
These good-looking, tall height fabricated valve covers have an embossed Trick Flow® logo and clear roller rockers and stud girdles. The covers are made from 0.084 in. thick aluminum to reduce engine weight and include the necessary fasteners to ensure a correct installation.
$539.99
Trick Flow® Replacement Valve Cover Grommets
Trick Flow® offers these replacement valve cover grommets for use with their billet oil fill kits and valve covers. These quality service replacements help to ensure a positive oil seal.
$2.99
Trick Flow® Valve Cover Spacers
These Trick Flow® valve cover spacers give you the clearance you need to run shaft mount roller rocker arms on your Chevrolet LS1 engine. They are made of aluminum, are 1/2 in. thick, and include the longer bolts and thicker gaskets for installation.
$279.99
Trick Flow® Valve Cover Spacer O-Ring Cords
These Trick Flow® valve cover spacer O-ring cords are perfect for servicing your Trick Flow® valve cover spacers. Included is enough O-ring cord to service one pair of valve covers.
$39.99
Trick Flow® Valve Cover Spacer Replacement Hardware Kits
Trick Flow® has you covered if you ever need to replace the hardware for your valve cover spacers. These kits include: * Eight 1/4-20 in. Nyloc nuts * Eight 1/4-20 in./1/4-28 in. stainless steel studs * Eight 1/4-20 in. x 2 1/4 in. set screws * Eight 1/4-20 in. hex nuts with conical washers * Eight aluminum spacers
$59.99