Availability
Trick Flow Specialties Induction
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$82.99
—
$92.99
Trick Flow® StreetBurner® and Track Heat® Intake Manifold Hardware Kits
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
$50.99
Trick Flow® EFI Heat Spacer Kits
CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit between the upper and lower intakes to create a heat flow barrier. This keeps the air in the upper intake cooler and denser. In addition, they will allow the use of taller valve covers by raising the height of the upper intake manifold. The EFI heat spacers are available in 3/8 in. and 1 in. thick versions; gaskets and longer mounting bolts are also included.
$64.99
—
$99.99
Trick Flow® R-Series and 351W Intake Manifold Hardware Kits
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
$57.99
Trick Flow® Phenolic Throttle Body Spacers
With one of these phenolic spacers, you can increase pulling power and enhance throttle response without sacrificing drivability. In addition to improving power and throttle response, these spacers will also increase gas mileage. Each spacer includes all of the necessary gaskets and hardware for an easy installation.
$64.99
—
$79.99
Trick Flow® Box-R-Series Upper Intake Manifold Hardware Kits
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
$50.99
Trick Flow® 5.0L R-Series EFI NOS Hardware Kits
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
$52.99
Trick Flow® Replacement LT1 Air Inlet Elbows
In the event that you have to replace the elbow from your Trick Flow® LT1 air inlet elbow kit, we have you covered. These elbows are available in the three original finishes--polished, natural, and black powdercoated, or choose the new black composite polymer design. These are the elbows only; no hardware is included.
$70.99
—
$81.99