Availability
Trick Flow Specialties Induction
Trick Flow® EFI Heat Spacer Kits
CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit between the upper and lower intakes to create a heat flow barrier. This keeps the air in the upper intake cooler and denser. In addition, they will allow the use of taller valve covers by raising the height of the upper intake manifold. The EFI heat spacers are available in 3/8 in. and 1 in. thick versions; gaskets and longer mounting bolts are also included.
$110.99
—
$174.99
Trick Flow® SN95 Throttle Body Adapters
These aluminum adapters allow the use of a Trick Flow® EFI intake manifold on 1994-95 5.0L Mustangs.
$111.99
—
$119.99
Trick Flow® R-Series A460 Tunnel Ram Intake Manifolds for Ford 429/460
The R-Series A460 Tunnel Ram Intake Manifolds are ideal for all 8,000 plus rpm applications such as drag racing or tractor pulling. These manifolds feature a 2-piece design. The lower manifold attaches to the engine block and is made from thick-wall A319 aluminum for durability and feature bosses for nitrous and fuel injection nozzles. The interchangeable A319 aluminum top covers allow mounting of either single or dual Dominator-style carbs. Both the lower manifold and a top cover must be purchased to make a complete intake manifold. Over height of the lower manifold to the top of carburetor mounting pad with the single carb top is 13.040 in. The overall height of the lower manifold with the dual carb top is 10.415 in. These R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
$124.99
Trick Flow® 4.6L Lower Intake Manifold Hardware Kits
These Trick Flow® 4.6L Lower intake manifold hardware kits include all the hardware you need for your Trick Flow® manifold. Kits include: * Two socket head cap screws M8 x 1.25 x 75mm * Nine hex flange bolts M8 x 1.25 x 35mm * Two 3/8 NPT plugs * One gasket sheet TFS-51800002-G * Twelve hex flange bolts M6 x 1.0 x 25mm * Four #8 x 3/4 in. self tapping screws * Four zip ties * One hose barb C-rings * One 5/8 in. ID x 48 in. 90 degree coolant tube * One 12 in. black nylon hose protector * One 1 1/2 in. ID formed upper radiator hose extension * One 1 1/2 in. ID aluminum hose connector * One 12 in. 19/32 in. ID PCV hose (Romeo Engines)* * One 12 in. 11/32 in. ID PCV hose (Windsor Engines)* * Two 14 in. 1/4 in. fuel injection hoses * Four fuel injection hose clamps * Two thermal hose protectors * Two 5/8 in. hose clamps * Two 1 1/2 in. hose clamps * One 1/2 NPT x 3/4 in. barb fitting * One EGR extension tube * One 5/8 in. 90 degree steel compression fitting * Two hex flange bolts M8 x 1.25 x 20mm * Two M8 flat washers * One alternator relocation kit TFS-5182ALTR
$234.99
Trick Flow® TFX™ Cold Air Intake Kits
Trick Flow® TFX™ cold air intake kits replace an engine’s restrictive stock air cleaner or airbox with a black composite, low-restriction unit and reusable cotton-gauze filter that will increase airflow to the engine. And as we all learned in Horsepower 101, more air equals more power. The kits include an air filter assembly, a plenum (where applicable), mounting hardware, and instructions. Manufactured by K&N for Trick Flow
$199.50
—
$249.99
Trick Flow® LT1 Air Inlet Elbows
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
$103.99
Trick Flow® Replacement Intake Manifold Gaskets
Trick Flow® replacement intake manifold gaskets are direct replacements for the gaskets included with any Trick Flow® intake manifolds. They give you a quality seal that you can trust.
$210.99
—
$211.99