Availability
Trick Flow Specialties Cylinder Heads
Trick Flow® Head Bolt Bushings
Are you looking for a head bolt reducer bushing for your Trick Flow® heads? Then you need a set of these Trick Flow® head bolt bushings. If your block uses a smaller diameter bolt than your head does, then one of these is what you need.
$64.99
Trick Flow® Engine Steam Line Hoses for GM LS
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
$74.99
Trick Flow® by Cometic MLS Head Gaskets
These multi-layer steel head gaskets from Trick Flow and Cometic are the best way to seal aftermarket cylinder heads to an engine. With three layers of stainless steel, these gaskets offer better torque retention, less distortion, and better sealing than conventional or composite head gaskets in high horsepower, high cylinder-pressure applications.
$99.99
Trick Flow® Valve Seats
These Trick Flow® replacement valve seats are just like the originals. Made from premium materials and built to exacting tolerances, they replace your existing worn or damaged valve seats.
$54.99
—
$79.99
Trick Flow® Cylinder Head Bolt Kits
Keep combustion where it belongs! Trick Flow’s high-quality cylinder head bolt kits provide consistent clamping force to keep cylinder heads in place. The bolts are made from premium quality alloy steel with cold-formed heads and rolled threads, and a premium black oxide finish protects them from wear and corrosion. Each kit contains all the bolts necessary to mount a pair of heads, including hardened washers.
$59.99
—
$94.99
Trick Flow® A460 18-Bolt Cylinder Head Fastener Conversion Kits
These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the necessary parts to complete the installation of A460 18-bolt cylinder heads. They feature a black oxide finish that protects them from wear and corrosion. These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the following components: * Eight 7/16 in. x 0.660 in. washers * Eight 7/16 in. x 0.813 in. washers * Eight 7/16 in.-20 NF 12-point nuts * Eight 7/16 in. x 2.500 in. studs * Eight 7/16 in. x 1.750 in. 12-point bolts
$69.99
Trick Flow® Engine Steam Line 4-Corner Plumbing Kits for GM LS
Plumb all four corners of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes with Trick Flow®. Your 4-corner plumbing kits include: * Two 2 ft. 1/4 in. black rubber hoses * Twelve 9/16 in. hose clamps * Four 4 AN 90 degree fittings * Stainless steel tee barb fitting * Stainless steel cross barb fitting
$64.99
Trick Flow® Premium MLS Head Gaskets
Get superior combustion, oil, and coolant control with premium MLS head gaskets from Trick Flow®. The gaskets feature multiple layers of stainless steel to maintain proper sealing under the extreme pressure and heat found in high performance applications.
$59.99
Trick Flow® Replacement Valves
Don’t cut corners when it’s time to replace or upgrade the valves in your Trick Flow® cylinder heads. These replacement valves are the same high quality units used in Trick Flow® assembled heads. They feature stainless steel construction, swirl polishing, hardened tips, undercut stems, and dished heads (most applications). Available for all Trick Flow® cylinder heads.
$59.99
Trick Flow® Replacement Severe and Extreme Duty Valves
Trick Flow® Severe and Extreme Duty valves are great options for higher-end applications where pressures and temperatures are high, and durability is a must. These valves are constructed with more exotic materials and thicker cross-sections than our standard Stainless Steel valves. These valves can be used as replacements or upgrades to valves currently used in Trick Flow® cylinder heads without modification.
$64.99