Trick Flow’s legendary Twisted Wedge® 170 series cylinder heads are better than ever! The A356-T61 aluminum castings have been redesigned on the exhaust side to improve strength and water jacket integrity for durability in street and entry level strip applications. All of the unique features that made Twisted Wedge series heads so dominant in high performance and racing are still here—Twisted Wedge combustion chambers and valve layout, high-flow/high-velocity intake runners, and top-quality valvetrain components—plus CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending) and refined Fast As Cast® runners that deliver near-CNC-ported power and airflow at cast head prices.
Certain Twisted Wedge 170 heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302,
and 351W engines. The heads are available fully assembled or as bare castings. Sold individually.
Image is a representation of this item.
Actual item may vary.
Trick Flow® Twisted Wedge® 170 Cylinder Heads for Small Block Ford TFS-51410004-M61
Cylinder Head, Twisted Wedge® 170, Fast As Cast®, Assy, 61cc Chamber, 1.46" Sp., Ford, Small Block, Each
Part Number:
TFS-51410004-M61
Part Type:
UPC:
842645111143
Cylinder Head Style:
Assembled
Cylinder Head Material:
Aluminum
Intake Port Shape:
Rectangular
Intake Valve Diameter (in):
2.020 in.
Cylinder Head Finish:
Natural
Combustion Chamber Volume (cc):
61
CNC-Machined Combustion Chamber:
Yes
Intake Runner Volume (cc):
170cc
Exhaust Runner Volume (cc):
66cc
CNC-Machined Intake Runner:
No
CNC-Machined Exhaust Runner:
No
Combustion Chamber Style:
Twisted Wedge®
Intake Port Location:
Standard
Exhaust Port Shape:
Square
Exhaust Port Location:
Standard
Intake Valves Included:
Yes
Exhaust Valves Included:
Yes
Exhaust Valve Diameter (in):
1.600 in.
Valve Springs Included:
Yes
Maximum Valve Lift (in):
0.600 in.
Outside Diameter of Outer Spring (in):
1.460 in.
Damper Spring Included:
Yes
Number of Springs Per Valve:
Dual
Retainers Included:
Yes
Retainer Material:
Chromoly steel
Locks Included:
Yes
Lock Style:
10 degree
Valve Stem Seals Included:
Yes
Rocker Arm Studs Included:
Yes
Rocker Arm Nut Thread Size:
3/8-24 in.
Rocker Arms Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
Yes
Guideplate Pushrod Size:
5/16 in.
Accessory Bolt Holes Drilled:
Yes
Intake Valve Angle:
15
Exhaust Valve Angle:
17
Valve Guides Included:
Yes
Valve Guide Material:
Bronze
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Ductile iron
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
Yes
Quantity:
Sold individually.
Notes:
Designed for hydraulic roller camshafts. Trick Flow twisted wedge pistons are required for use with these heads to allow for piston to valve clearance with camshafts over .550 in. lift. Valve cover rail is raised .350 in. over stock.
CARB EO Number:
Emissions:
California EO Approved
Suggested Parts
Parts that may improve the performance or installation of part number TFS-51410004-M61
Trick Flow Specialties TFS-51400510 - Trick Flow® Roller Rocker Arms
Rocker Arms, 1.6 Ratio, 3/8 in. Stud, Full Roller Design, Aluminum, Small Ford and 351W, Set of 16
View
Trick Flow Specialties TFS-92005 - Trick Flow® Cylinder Head Bolt Kits
Cylinder Head Bolt Kit, Hex Head, Chromoly Steel, Black Oxide Finish, Ford 289/302, Each
ViewRepair Parts
Trick Flow Specialties TFS-16315-16 - Trick Flow® by PAC Racing Dual Valve Springs
Valve Springs, PAC Racing, Dual, 1.460 in. Outside Diameter, 438 lbs./in. Rate, 1.100 in. Coil Bind, Set of 16
View
Trick Flow Specialties TFS-30400454 - Trick Flow® Valve Seals
Valve Stem Seals, Viton® Fluoroelastomer, Positive Stop, 11/32 in. Valve Stem, .500 in. I.D, Set of 16
View
Email this page Close