Trick Flow Specialties TFS-51403005 - Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L

Image is a representation of this item.
Actual item may vary.

Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L TFS-51403005

Camshaft, Hydraulic Roller, Advertised Duration 312/316, Lift .595/.595, Lobe Sep. 110, Small Ford, 5.0L, Each

Part Number:
TFS-51403005
Part Type:
UPC:
842645110740
Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
3,400-7,000
Intake Duration at 050 inch Lift:
250
Exhaust Duration at 050 inch Lift:
254
Duration at 050 inch Lift:
250 int./254 exh.
Advertised Intake Duration:
312
Advertised Exhaust Duration:
316
Advertised Duration:
312 int./316 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.595 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.595 in.
Valve Lift with Factory Rocker Arm Ratio:
0.595 int./0.595 exh.
Lobe Separation (degrees):
110
Camshaft Gear Attachment:
1-bolt
Computer-Controlled Compatible:
No
Valve Springs Required:
Yes
Camshaft Manufacturers Description:
Rough idle, 3,400-7,000 rpm powerband. 3,000-3,500 rpm stall converter and 3.90-4.11 gears recommended. Calibrated mass airflow meter required. Compression: 10:1 minimum.
Quantity:
Sold individually.

Give your small block Ford or Ford 5.0L engine significant horsepower and torque increases with a Trick Flow® Track Max® Hydraulic Roller Camshaft. These premium billet steel, hydraulic roller camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances.

Warranty

Suggested Parts

Parts that may improve the performance or installation of part number TFS-51403005

Click here for more information about Trick Flow Specialties TFS-16306-16 - Trick Flow® by PAC Racing Dual Valve Springs

Trick Flow Specialties TFS-16306-16 - Trick Flow® by PAC Racing Dual Valve Springs

Valve Springs, PAC Racing, Dual, 1.275 in. Outside Diameter, 450 lbs./in. Rate, 1.080 in. Coil Bind, Set of 16

View
Click here for more information about Trick Flow Specialties TFS-51400444 - Trick Flow® Valve Locks

Trick Flow Specialties TFS-51400444 - Trick Flow® Valve Locks

Valve Locks, Machined, Hardened Steel, 7 Degree, 1-Groove, 11/32 in. Valve Stem, Set of 32

View

Email this page Close
Close