Trick Flow Specialties TFS-51403003 - Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L

Image is a representation of this item.
Actual item may vary.

Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L TFS-51403003

Camshaft, Hydraulic Roller, Advertised Duration 298/310, Lift .574/.595, Lobe Sep. 110, Small Ford, 5.0L, Each

Part Number:
TFS-51403003
Part Type:
UPC:
842645110726
Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
3,200-6,800
Intake Duration at 050 inch Lift:
236
Exhaust Duration at 050 inch Lift:
248
Duration at 050 inch Lift:
236 int./248 exh.
Advertised Intake Duration:
298
Advertised Exhaust Duration:
310
Advertised Duration:
298 int./310 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.574 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.595 in.
Valve Lift with Factory Rocker Arm Ratio:
0.574 int./0.595 exh.
Lobe Separation (degrees):
110
Camshaft Gear Attachment:
1-bolt
Computer-Controlled Compatible:
No
Valve Springs Required:
Yes
Camshaft Manufacturers Description:
Rough idle, 3,200-6,800 rpm powerband. 3,000-3,500 rpm stall converter and 3.90-4.11 gears recommended. Calibrated mass airflow meter required. Compression: 10:1 minimum.
Quantity:
Sold individually.

Give your small block Ford or Ford 5.0L engine significant horsepower and torque increases with a Trick Flow® Track Max® Hydraulic Roller Camshaft. These premium billet steel, hydraulic roller camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances.

Warranty

Suggested Parts

Parts that may improve the performance or installation of part number TFS-51403003

Click here for more information about Trick Flow Specialties TFS-21400004 - Trick Flow® Hydraulic Lifters and Lash Adjusters

Trick Flow Specialties TFS-21400004 - Trick Flow® Hydraulic Lifters and Lash Adjusters

Lifter, Hydraulic, for OEM Roller-Type Camshafts, Ford 5.0L, Each

View
Click here for more information about Trick Flow Specialties TFS-51400510 - Trick Flow® Roller Rocker Arms

Trick Flow Specialties TFS-51400510 - Trick Flow® Roller Rocker Arms

Rocker Arms, 1.6 Ratio, 3/8 in. Stud, Full Roller Design, Aluminum, Small Ford and 351W, Set of 16

View

Email this page Close
Close