Trick Flow Specialties TFS-51403002 - Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L

Image is a representation of this item.
Actual item may vary.

Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L TFS-51403002

Camshaft, Hydraulic Roller, Advertised Duration 286/294, Lift .542/.563, Lobe Sep. 112, Small Ford, 5.0L, Each

Part Number:
TFS-51403002
Part Type:
UPC:
842645110719
Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
2,500-6,000
Intake Duration at 050 inch Lift:
224
Exhaust Duration at 050 inch Lift:
232
Duration at 050 inch Lift:
224 int./232 exh.
Advertised Intake Duration:
286
Advertised Exhaust Duration:
294
Advertised Duration:
286 int./294 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.542 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.563 in.
Valve Lift with Factory Rocker Arm Ratio:
0.542 int./0.563 exh.
Lobe Separation (degrees):
112
Camshaft Gear Attachment:
1-bolt
Computer-Controlled Compatible:
No
Grind Number:
HR-236/359-2S1-10
Valve Springs Required:
Yes
Camshaft Manufacturers Description:
Fair idle, 2,500-6,000 rpm powerband. 2,500-3,000 rpm stall converter or 5-speed with 3.55 and numerically higher gears recommended. Calibrated mass airflow meter required. Compression 9.5:1 minimum.
Quantity:
Sold individually.

Give your small block Ford or Ford 5.0L engine significant horsepower and torque increases with a Trick Flow® Track Max® Hydraulic Roller Camshaft. These premium billet steel, hydraulic roller camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances.

Warranty

Email this page Close
Close