Trick Flow Specialties TFS-41302000 - Trick Flow® Track Max® Camshafts for Big Block Chevrolet

Image is a representation of this item.
Actual item may vary.

Trick Flow® Track Max® Camshafts for Big Block Chevrolet TFS-41302000

Camshaft, Hydraulic Roller, Advertised Duration 286/292, Lift .600/.600, Lobe Sep. 112, Big Chevy, Each

Part Number:
TFS-41302000
Part Type:
UPC:
842645109232
Cam Style:
Hydraulic roller tappet
Basic Operating RPM Range:
3,000-6,200
Intake Duration at 050 inch Lift:
236
Exhaust Duration at 050 inch Lift:
242
Duration at 050 inch Lift:
236 int./242 exh.
Advertised Intake Duration:
286
Advertised Exhaust Duration:
292
Advertised Duration:
286 int./292 exh.
Intake Valve Lift with Factory Rocker Arm Ratio:
0.600 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio:
0.600 in.
Valve Lift with Factory Rocker Arm Ratio:
0.600 int./0.600 exh.
Lobe Separation (degrees):
112
Camshaft Gear Attachment:
3-bolt
Computer-Controlled Compatible:
No
Valve Springs Required:
Yes
Camshaft Manufacturers Description:
Fair idle, good midrange and strong top-end power, 3,000-6200 rpm powerband. 2,500-3,000 rpm stall converter. Compression: 9.5:1 minimum.
Quantity:
Sold individually.

Give your big block Chevrolet engine significant horsepower and torque increases with a Trick Flow® Track Max® Camshaft. These camshafts are dyno-proven to produce a wide power curve over the entire rpm range, not just at a particular rpm point or peak. The camshafts are cut from premium blank cores and checked for proper hardness before being precision ground to exact tolerances. Big block Chevrolet camshafts are available in hydraulic roller and mechanical roller grinds.

Warranty

Suggested Parts

Parts that may improve the performance or installation of part number TFS-41302000

Click here for more information about Trick Flow Specialties TFS-21400425 - Trick Flow® Steel Valve Spring Retainers

Trick Flow Specialties TFS-21400425 - Trick Flow® Steel Valve Spring Retainers

Valve Spring Retainers, Chromoly Steel, 10 Degree, 1.550 in. O.D., .690 in. I.D., Set of 16

View
Click here for more information about Trick Flow Specialties TFS-52400444 - Trick Flow® Valve Locks

Trick Flow Specialties TFS-52400444 - Trick Flow® Valve Locks

Valve Locks, Machined, Hardened Steel, 10 Degree, 1-Groove, 11/32 in. Valve Stem, Set of 32

View

Email this page Close
Close