Part Number:
TFS-K306-550-470
Part Type:
Product Line:
Camshaft Included:
Yes
Duration at 050 inch Lift:
238 int./242 exh.
Advertised Duration:
291 int./295 exh.
Valve Lift with Factory Rocker Arm Ratio:
0.595 int./0.595 exh.
Intake Manifold Included:
No
Fuel Delivery Style:
Fuel injected
Timing Chain and Gears Included:
No
Lifters Included:
No
Gaskets Included:
Yes
Cylinder Head Style:
Assembled
Cylinder Head Material:
Aluminum
Cylinder Head Finish:
Natural
Combustion Chamber Volume (cc):
65
CNC-Machined Combustion Chamber:
Yes
Intake Runner Volume (cc):
225cc
Exhaust Runner Volume (cc):
80cc
CNC-Machined Intake Runner:
Yes
CNC-Machined Exhaust Runner:
Yes
Intake Port Location:
Standard
Intake Port Shape:
Cathedral
Exhaust Port Shape:
Oval
Exhaust Port Location:
Standard
Intake Valves Included:
Yes
Intake Valve Diameter (in):
2.055 in.
Exhaust Valves Included:
Yes
Exhaust Valve Diameter (in):
1.575 in.
Intake Valve Angle:
13.50
Exhaust Valve Angle:
13.50
Valve Springs Included:
Yes
Outside Diameter of Outer Spring (in):
1.300 in.
Damper Spring Included:
No
Number of Springs Per Valve:
Dual
Retainers Included:
Yes
Retainer Material:
Titanium
Locks Included:
Yes
Lock Style:
7 degree
Valve Stem Seals Included:
Yes
Valve Stem Seal Style:
Positive stop
Valve Stem Seal Material:
Viton® fluoroelastomer
Rocker Arms Included:
Yes
Rocker Arm Style:
Full roller
Rocker Arm Ratio:
1.7
Rocker Arm Studs Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
No
Pushrods Included:
Yes
Valve Covers Included:
No
Valve Cover Mounting Style:
Centerbolt
Accessory Bolt Holes Drilled:
Yes
Valve Guides Included:
Yes
Valve Guide Material:
Bronze
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Ductile iron
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
No
Quantity:
Sold as a kit.
Notes:
Aftermarket tuning is required after installation of this kit.
Don't waste time trying to figure out which parts you need to get the performance you want--Trick Flow® has already done the work for you! These GenX® Top-End engine kits for GM LS2 are designed and dyno-tested to deliver the performance you want for less than the cost of purchasing the parts separately.
Each kit includes:
* Pair of Trick Flow® GenX® street/strip cylinder heads
* Specially matched hydraulic roller cam
* Roller rocker arms
* Pushrods
* Head gaskets
* Head bolts
* Exhaust gaskets
* Balancer bolt
