These Trick Flow GenX® 225 cathedral port cylinder heads for GM 6.0L LS2 engines are fully CNC-machined to significantly increase the performance of LS2-powered cars and trucks. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance.
Trick Flow GenX 225 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
Image is a representation of this item.
Actual item may vary.
Trick Flow® GenX® 225 Cylinder Heads for GM LS2 TFS-3061T001-C02
Cylinder Head, GenX® 225, CNC Competition Ported, Assembled, 65cc CNC Chambers, Ti Retainers, GM LS2, Each
Part Number:
TFS-3061T001-C02
Part Type:
Product Line:
UPC:
842645107283
Combustion Chamber Volume (cc):
65
Intake Runner Volume (cc):
225cc
Exhaust Runner Volume (cc):
80cc
Cylinder Head Style:
Assembled
Cylinder Head Material:
Aluminum
Intake Port Shape:
Cathedral
Intake Valve Diameter (in):
2.055 in.
Cylinder Head Finish:
Natural
CNC-Machined Combustion Chamber:
Yes
CNC-Machined Intake Runner:
Yes
CNC-Machined Exhaust Runner:
Yes
Combustion Chamber Style:
Heart
Intake Port Location:
Standard
Exhaust Port Shape:
Oval
Exhaust Port Location:
Standard
Spark Plug Style:
Angle
Intake Valves Included:
Yes
Exhaust Valves Included:
Yes
Exhaust Valve Diameter (in):
1.575 in.
Valve Springs Included:
Yes
Maximum Valve Lift (in):
0.600 in.
Outside Diameter of Outer Spring (in):
1.300 in.
Damper Spring Included:
No
Number of Springs Per Valve:
Dual
Retainers Included:
Yes
Retainer Material:
Titanium
Locks Included:
Yes
Lock Style:
7 degree
Valve Stem Seals Included:
Yes
Rocker Arm Studs Included:
No
Rocker Arms Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
No
Valve Cover Mounting Style:
Centerbolt
Accessory Bolt Holes Drilled:
Yes
Intake Valve Angle:
13.50
Exhaust Valve Angle:
13.50
Valve Guides Included:
Yes
Valve Guide Material:
Bronze
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Ductile iron
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
No
Quantity:
Sold individually.
Notes:
Must be used with roller rocker arms. For use on engines with a minimum bore diameter of 4.000 in.
CARB EO Number:
Emissions:
California EO Approved
Suggested Parts
Parts that may improve the performance or installation of part number TFS-3061T001-C02
Trick Flow Specialties TFS-9100 - Trick Flow® Cylinder Head Work Stands
Cylinder Heads, Work Stands, Pair
View
All Suggested Parts
Show All
Repair Parts
Trick Flow Specialties TFS-30600212 - Trick Flow® Replacement Valves
Valves, Exhaust, Stainless Steel, 1.575 in. Diameter, 8.0mm Stem, 124.8mm Length, GenX®, GM LS, Set of 8
View
Trick Flow Specialties TFS-16306-16 - Trick Flow® by PAC Racing Dual Valve Springs
Valve Springs, PAC Racing, Dual, 1.275 in. Outside Diameter, 450 lbs./in. Rate, 1.080 in. Coil Bind, Set of 16
View
Email this page Close