Trick Flow® TFX™ Fuel Injectors
High performance fuel injectors from Trick Flow®.
With disc-type fuel control valves, improved nozzles, and more reliable coil windings, Trick Flow's® new TFX™ electronic fuel injectors atomize fuel better, are less likely to become clogged by fuel deposits, are quieter, and require less energy to operate than other aftermarket injectors. And the f...

Trick Flow® High-Flow Electric Fuel Pumps
High-flow fuel pumps from Trick Flow®.
Multi-port EFI systems need a stable fuel supply at any rpm, and Trick Flow® high-pressure, high-flow electric fuel pumps will do the job. They feature a free-flow rate of 43 gph at up to 85 psi. Trick Flow® high-flow pumps also have 5/16 in. inlets and outlets, brass stud terminals for secure conne...

Trick Flow® LT1 Air Inlet Elbows
Increased performance, better looks.
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for ...

Trick Flow® Throttle Bodies
More air equals more power!
Get extra rear-wheel horsepower out of your engine by feeding it more air with one of these Trick Flow® throttle bodies. These precisely machined die-cast aluminum throttle bodies include gaskets and hardware, so installation is quick and easy.

Trick Flow® Track Heat® Intake Manifolds for Ford 5.0L
Get more power with a Trick Flow® manifold.
When it comes to making horsepower, one size doesn't fit all. That's why Trick Flow® designed their Track Heat® intake manifold for 5.0L Fords. Each manifold is computer-engineered to deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior hi...

Trick Flow® EFI Heat Spacer Kits
Keep the air in your upper intake cooler and denser.
CNC-machined in the USA from premium phenolic material, Trick Flow® EFI heat spacers fit between the upper and lower intakes to create a heat flow barrier, keeping the air in the upper intake cooler and denser. In addition, these heat spacers will allow the use of taller valve covers by raising the ...

Trick Flow® High-Flow Upper Plenums for Ford 4.6L 2V
Better airflow equals more power.
More horsepower starts with more air--as much as 100 cfm of additional air over stock with a Trick Flow® High-Flow upper plenum. Made for 1996-2004 4.6L 2V powered Ford cars and trucks, the aluminum plenums have been raised 3/4 in. to enhance airflow yet still fit under a stock hood. They work with ...

Trick Flow® TFX™ Inline Fuel Filters
High-flow fuel filters from Trick Flow®!
Trick Flow® TFX™ inline fuel filters keep fuel clean without restricting it--just what your high performance engine requires. The black anodized billet aluminum filters can handle up to 300 psi of fuel pressure and 1,000 hp. They come available with your choice of 10, 40, or 100-micron elements and ...

Trick Flow® StreetBurner® Intake Manifolds for Ford 5.0L
Your choice for EFI performance!
When it comes to making horsepower, one size doesn't fit all. That's why Trick Flow® designed their StreetBurner® intake manifold for 5.0L Fords. Each manifold is computer-engineered to deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior ...

Trick Flow® TFX™ Cold Air Intake Kits
Engineered airflow from Trick Flow®!
Don't let your stock air box hold you back--the induction experts at Trick Flow® have created these cold air intake kits, which are engineered to meet the specific intake demands of your fuel injected ride. Trick Flow® air intake kits replace your restrictive air cleaner with a low-restriction assem...

Trick Flow® TFX™ Electric Fuel Pumps for 1986-97 EFI Mustangs
Unleash your engine's potential!
If you've made serious engine mods to your 1986-97 EFI Mustang, then you'll need a fuel pump that can keep up. Luckily for you, these TFX™ in-tank fuel pumps from Trick Flow® are designed to do just that so your engine can run at full potential.

Trick Flow® TFX™ Electric Fuel Pumps for Carbureted Engines
High-flow fuel pumps for serious horsepower!
Trick Flow® TFX™ electric fuel pumps feature a free-flowing design to meet the high performance demands of your carbureted engine. The pumps are rated to flow 140 gph with a 14 psi maximum pressure and feature 3/8 in. NPT inlet and outlet ports.

Trick Flow® Upper Plenum and Throttle Body Combos
Improved airflow from Trick Flow® upper intake plenum and throttle body combos.
Trick Flow® plenum and throttle body combos pack more power-building air into your 1996-2004 4.6L, up to 10-15 extra horses, plus they improve throttle response without the hassle of mixing and matching parts. In one handy package, you get Trick Flow's silver powdercoated aluminum upper plenum that'...

Trick Flow® Track Heat® Intake Manifolds for Ford 4.6L 2V
Track Heat® performance for 4.6L 2V Ford Mustangs.
Add some ponies to your Mustang with Trick Flow® Track Heat® 4.6L 2V intake manifolds. Designed for hot street and track-ready 4.6L SOHC Mustangs, the Track Heat® 4.6L 2V manifolds improve performance in the meat of the engine's powerband between 1,500 and 6,500 rpm (2,000-7,000 rpm with Cobra twin ...

Trick Flow® SN95 Throttle Body Adapters
Adapt your 5.0L to use a Trick Flow® EFI intake.
These aluminum adapters allow the use of a Trick Flow® EFI intake manifold on 1994-95 5.0L Mustangs.

Trick Flow® R-Series A460 Intake Manifolds for A460 Cylinder Heads
The perfect addition to A460 cylinder heads.
Intended for 500+ in., high-rpm engines, the Trick Flow® R-Series A460 intake manifolds provide significant horsepower and torque increases. Made to fit Trick Flow® PowerPort Race A460 big block Ford cylinder heads, these single plane intake manifolds feature a one-piece, spider-type design that use...

Trick Flow® TFX™ EFI Fuel Rail Kits
Feed your high performance engine.
These Trick Flow® TFX™ fuel rail kits come with everything you need to feed a high performance EFI engine--billet fuel rails, fittings, hoses, brackets, and a fuel pressure regulator. The regulator is adjustable from 35 to 85 psi for precise fuel delivery.

Trick Flow® TFX™ EFI Fuel Pressure Regulators
Increased fuel control from Trick Flow®!
These Trick Flow® TFX™ EFI fuel pressure regulators give you total control of your fuel pressure settings. The regulators feature -6 AN O-ring boss inlet, outlet, and return fittings, a 1/8 in. NPT gauge port, and a 1:1 fuel pressure rise from the boost reference port. Trick Flow® TFX™ EFI fuel pres...

Trick Flow® TFX™ Universal Bypass Regulators
Rock-steady fuel pressure from Trick Flow bypass regulators.
These TFX™ universal bypass fuel pressure regulators from Trick Flow® are ideal for bypass applications where more fuel flow and superior pressure control are required. Fuel pressure can be adjusted from 3-20 psi, making them perfect for carburetors, or you can install their included high pressure s...

Trick Flow® Phenolic Throttle Body Spacers
Increase power and enhance throttle response.
With one of these phenolic spacers, you can increase pulling power and enhance throttle response without sacrificing drivability. In addition to improving power and throttle response, these spacers will also increase gas mileage. Each spacer includes all of the necessary gaskets and hardware for an ...

Trick Flow® Chrome Air Cleaners
Serious shine from the serious horsepower people.
Top off your Trick Flow® equipped engine with one of these chrome air cleaners. The air cleaners feature chrome plated steel construction with an embossed Trick Flow® logo. Available in multiple styles to clear different carburetor and ignition combinations.

Trick Flow® R-Series Intake Manifolds for Ford 5.0L
Step up to more power with Trick Flow® R-series manifolds.
When it comes to making horsepower, one size doesn't fit all. That's why Trick Flow® designed their R-Series intake manifold for 5.0L Fords. Each manifold is computer-engineered to deliver an excellent balance of airflow distribution and velocity to increase low-end torque and provide superior high-...

Trick Flow® Track Heat® Intake Manifolds for Ford 429/460
High-rpm performance for your big block Ford!
The Track Heat® single plane intake manifold for big block Ford engines is designed for street/strip applications that operate in the 3,500-8,000 rpm range and requires a Holley 4150-style 4-barrel carburetor. The manifold's high-rise, one-piece spider design with high flowing individual extended ru...

Trick Flow® Throttle Cable Brackets for 5.0L Ford
Mount your Mustang's throttle cables.
These Trick Flow® throttle cable brackets provide a place to mount throttle cables on 1986-93 5.0L Mustangs with either 75mm or 90mm race manifolds and no EGR plate. They feature a clear anodized finish and include gaskets and mounting hardware.

Trick Flow® EV1 Fuel Injector Harness Adapter Kits
Make swapping fuel injectors easier than ever with these Trick Flow® fuel injector harness adapter kits.
Trick Flow® solves your fuel injection conversion problems with these EV1 fuel injector harness adapter kits. Now you can make the change from smaller EV6 injectors to big EV1 injectors in your LS2 or L92 engine without having to cut a single thing. Each kit includes one adapter, O-ring, and spacer.