Trick Flow® Valve Spring ID Locators
Long-lasting valvetrain components.
These Trick Flow® valve spring ID locators are made from hardened 4140 chromemoly steel for long life and are black oxide coated for a high-quality appearance. All ID locators are .060 in. thick. The ID locators are designed for use with all cast iron and aluminum cylinder heads.

Trick Flow® Valve Cover Adapter Replacement Studs
Valve cover adapter replacement studs by Trick Flow®.
If you are using valve cover adapters that allow you to run early-style valve covers with late model Chevrolet centerbolt heads, then there's a chance that you may need replacement hardware at some point in time. If that's the case, Trick Flow® has you covered! These valve cover adapter replacement ...

Trick Flow® Stainless Steel Intake Manifold Bolt Kits
Bolt down your intake manifold with some Trick Flow® style.
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless stee...

Trick Flow® Cooler and Cushion Packs
Cold drinks and comfy seats!
These Trick Flow® cooler and cushion packs keep beverages cold and a seat cushion handy. The soft-sided cooler has a zippered center with an insulated liner, handles that fasten together with a hook-and-loop closure, and a removable shoulder strap. The two included seat cushions store in the side po...

Trick Flow® Sew-On Patches
Trick Flow® means horsepower.
Let the competition know where all of that horsepower comes from with a Trick Flow® sew-on patch. These are full-color patches with the embroidered Trick Flow® Racing logo.

Trick Flow® Valve Spring Shims
High-quality valvetrain components.
These Trick Flow® valve spring shims are made from hardened 4140 chromemoly steel for long life and are black oxide coated for a high-quality appearance. All valve spring shims are .060 in. thick. These valve spring shims are designed for use with all cast iron and aluminum cylinder heads.

Trick Flow® Valve Cover Bolts
The right hardware ensures a correct installation.
These Trick Flow® valve cover bolts not only keep your valve covers securely fastened, but they also do it with great style. They're made of high-quality grade steel and have a black oxide finish to offer up lasting performance and stylish good looks.

Trick Flow® C-4 Pan Fill Conversion Kits
Trick Flow® to the rescue!
These Trick Flow® C-4 pan fill conversion kits allow owners of Ford C-4 transmissions with screw-in dipsticks to use a Trick Flow® aluminum transmission pan. Drill and tap the pan to accept the fitting, screw in your dipstick just like factory, and you're all set.

Trick Flow® Track Max® Cam Handles
Make cam installation easy.
Trick Flow® Track Max® cam handles make your cam installation much easier. They feature an innovative U-shaped design that provides more leverage when you need it the most. And, their universal mounting holes fit all camshafts. These handles are cushioned for comfort and feature a protective zinc fi...

Trick Flow® Cylinder Head Replacement Components for Ford 4.6L/5.4L 2V
These Trick Flow Cylinder Head Replacement Components are here to help, if you should ever need to repair your cylinder heads. These parts are designed for Trick Flow Heads only!

Trick Flow® Supercharger Main Body Components
Trick Flow® teamed up with the supercharger experts at Magnuson.
Trick Flow® supercharger main body components come with the MP112 or MP122 supercharger, depending on the application. They have a standard roots design, but with intermeshed helical rotors and special port geometry to promote smooth, efficient, and quiet operation.

Trick Flow® TFX™ Nitrous Bottle Blankets
Nitrous bottle blankets from Trick Flow®.
Keep your nitrous bottle properly insulated with Trick Flow® TFX™ 10 lb. nitrous bottle blankets. The blankets will help maintain consistent bottle temperature and pressure to get maximum efficiency from your nitrous system. The blue nylon bottle blankets also feature an embroidered Trick Flow® logo...

Trick Flow® Differential Load Studs
Replacement parts from Trick Flow®.
These Trick Flow® differential load studs are exact replacements for your Trick Flow® rear-end support covers. Jam nuts are also included, unless otherwise specified.

Trick Flow® Air Intake Tubing Couplers
Put together your air intake with Trick Flow®.
These Trick Flow® air intake couplers allow you to assemble your air intake with ease. They are manufactured from high-quality materials and offered in a choice of sizes and styles to suit your specific needs.

Trick Flow® 485 HP GenX™ Top-End Engine Kits for GM LS1
Easy LS1 upgrades from Trick Flow®.
Don't waste time trying to figure out which parts you need to get the performance you want--Trick Flow® has already done the work for you! These GenX™ Top-End Engine Kits for GM LS1 are designed and dyno tested to deliver the performance you want for less than purchasing the parts separately. Each k...

Trick Flow® Twisted Wedge® Street/Strip Cylinder Heads for Small Block Ford
Aluminum heads for Ford bracket racers.
Trick Flow® Twisted Wedge® street/strip heads (formerly Track Heat®) are ideal for the entry-level bracket racer who needs more than standard Twisted Wedge® Street heads, but doesn't need to step up to the Twisted Wedge® Race heads. The Twisted Wedge® street/strip heads feature higher rate valve spr...

Trick Flow® Power Steering Reservoir Brackets
Adapt your stock bracket on your Ford truck for your Twisted Wedge® heads with Trick Flow® power steering reservoir brackets. These hefty steel brackets change your stock bracket to bolt it to the valve cover bolts, rather than to the side of your cylinder head. Trick Flow® power steering brackets i...

Trick Flow® LT1-Series MLS Head Gaskets
Gain awesome sealing power from Trick Flow® with MLS head gaskets from Cometic. Made in the USA, these multi-layer steel head gaskets are the perfect way to mate the muscle of Trick Flow® cylinder heads onto your LT-1 engine. Three layers of stainless steel offer better torque retention, less distor...

Trick Flow® Valve Seats
New seats for your heads.
These Trick Flow® replacement valve seats are just like the originals. Made from premium materials and built to exacting tolerances, they replace your existing worn or damaged valve seats.

Trick Flow® GenX™ 205 Cylinder Heads for LS 4.8L/5.3L/5.7L (Vortec)
Build serious street power!
Trick Flow® GenX™ 205 cylinder heads were designed to build maximum power in 5.7L and smaller bore LS engines, such as the Vortec 4800 and 5300. These engines were factory-installed in millions of GM pickups and SUVs and are becoming the powerplant of choice for kit cars, hot rods, musclecars, and s...

Trick Flow® Polo Shirts
100 percent cotton for 100 percent comfort.
Trick Flow® 100 percent cotton mesh polo shirts have a ribbed collar, welt trim cuffs, wood-tone buttons, and an embroidered Trick Flow® logo. They're available in a wide variety of sizes.

Trick Flow® Cylinder Head Washers
The proper washers for your cylinder head fasteners.
To ensure proper torque loads these Trick Flow® cylinder head washers are made from heat treated steel and machined to exacting tolerances. Available in multiple sizes to fit your needs.

Trick Flow® License Plates
A license plate from the horsepower experts.
How does a license plate say horsepower? Trick Flow®. These Trick Flow® license plates will let everyone know how you build horsepower.

Trick Flow® Box-R-Series Upper Intake Manifold Hardware Kits
Replacement hardware for your Trick Flow® Manifold.
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. ...

Trick Flow® Supercharger Components
Complete your supercharger kit.

Trick Flow® supercharger components will finish off your charger kit. They include all of the necessary parts to make installation a breeze.