Trick Flow® TFX™ Replacement Fuel Filter Elements
Maintain a clean fuel system with help from Trick Flow®.
Keep your fuel system flowing free and in top condition with one of these Trick Flow® TFX™ replacement fuel filter elements. Designed as replacements for Trick Flow® TFX™ fuel filters, these elements are available in fabric, cellulose, and stainless steel mesh material and will filter particles from...

Trick Flow® Cam Spacers
Patent-pending hex cam gear spacers.
Trick Flow® patent-pending hex cam gear spacers are great for holding the cam in position when you're setting the cam timing and torquing the cam gear bolts.

Trick Flow® Throttle Cable Brackets
Great looking brackets for your throttle cable install!
These Trick Flow throttle cable brackets make your carb installation look clean and professional. Installation is easy--just attach them to the base of your carburetor. All of the hardware that you need is included, even the return spring. These brackets are compatible with most carburetor designs a...

Trick Flow® R-Series A460 Tunnel Ram Top Covers
More fuel for your Ford.
Do you have a big-cube, high-rpm big block Ford and a Trick Flow® A460 tunnel ram? If so, then these Trick Flow® A460 tunnel ram top covers are for you. They allow you to run either single or dual Holley 4500 series Dominators, making them perfect for drag racing or tractor pulling.

Trick Flow® Rocker Arm Adjusting Nuts
The right hardware for the job.
When installing your roller rocker arms, don't forget these rocker arm adjusting nuts from Trick Flow®. These polylocks are available in a variety of sizes to suit your needs.

Trick Flow® Valve Spring Compressor Accessory Kits
The easy way to service mod-motor valve springs.
If you work on Ford 2V and 4V modular engines, then you need the Trick Flow® valve spring compressor accessory kits. These Trick Flow® kits come with an aluminum air hold adapter (because of the deep spark plug bore of these heads), a seal installer, and a magnetic pen (for the locks). They also inc...

Trick Flow® Rocker Stud Girdles for Chevy
Increase your valvetrain stability.
These Trick Flow® rocker stud girdles for Chevy are CNC-machined and help control valve lift and timing changes due to stud flex, allowing for more consistent high-rpm performance. Each stud girdle is anodized blue and comes with high-quality mounting hardware and hardened adjusting nuts. Tall-style...

Trick Flow® Ultra 18® 250 Cylinder Heads for Small Block Chevrolet
Take the 18 degree power leap.
These Trick Flow's Ultra 18 250 cylinder heads can make serious horsepower—power ideal for high-rpm circle track or super class drag racing. Dyno-testing proves it a 406 cubic inch, 12:1 compression small block with out-of-the-box Ultra 18 250 heads produced 730 peak horsepower at 7,500 rpm and 545 ...

Trick Flow® TFX™ Nitrous Spray Bar Plates
Upgrade your nitrous system.
Trick Flow® TFX™ nitrous spray bar plates can be used to build your own custom nitrous system or upgrade your current system without the expense of a new complete kit. EFI nitrous plates are designed to fit Trick Flow® fuel injected intake manifolds only and will fit intake manifolds with standard s...

Trick Flow® Replacement LT1 Air Inlet Elbows
Increased performance, better looks.
In the event that you have to replace the elbow from your Trick Flow® LT1 air inlet elbow kit, we have you covered. These elbows are available in the three original finishes--polished, natural, and black powdercoated, or choose the new black composite polymer design. These are the elbows only; no ha...

Trick Flow® R-Series and 351W Intake Manifold Hardware Kits
Replacement hardware for your Trick Flow® manifold.
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. ...

Trick Flow® Super 23® 230 Cylinder Heads for Small Block Chevrolet
18 degree performance from Trick Flow® Super 23® 230 cylinder heads.
These Trick Flow® Super 23® 230 aluminum cylinder heads are the closest thing you can get to 18 degree cylinder head performance in a 23 degree head. Designed to use standard small block Chevy valvetrain components and headers, Trick Flow® Super 23® 230 heads are the best value in small block Chevy ...

Trick Flow® Twisted Wedge® Race 206 Cylinder Heads for Small Block Ford
Race and win with Trick Flow heads.
Made just for racing-and winning-Trick Flow's Twisted Wedge Race 206 heads feature fully CNC-profiled "twisted wedge" combustion chambers, plus Fast As Cast™ 206cc intake runners, and 92cc exhaust runners raised 0.500 in. from stock. The heads are machined for big 2.080 in. intake/1.600 in. exhaust ...

Trick Flow® Titanium Valve Spring Retainers
Lighter, to rev higher.
One of the best ways to develop more power is to rev your engine higher. Trick Flow® titanium valve spring retainers will help you lighten your valvetrain so that you can safely and reliably get those revs. They're made from light-but-strong titanium and are available for either double or triple spr...

Trick Flow® Polished Die-Cast Aluminum Valve Covers
Make a statement with Trick Flow®.
Trick Flow® polished die-cast aluminum valve covers are much less prone to flex and distortion than stamped steel covers. The covers are die-cast from high-grade aluminum for a smooth, non-porous surface, and then polished to a high-luster finish. They feature holes for breather or oil fill caps, an...

Trick Flow® Spark Plug Sockets
Handy socket tool makes plug changes a snap!
Trick Flow® spark plug sockets are specialized tools designed for the sole purpose of servicing spark plugs on engines with headers. The genius of these specialty spark plug sockets from Trick Flow® is that they allow easier access into the tightest spots around your headers to provide for the easie...

Trick Flow® Ignition Wires
Get more spark with our wires.
Get more spark from your plugs with a set of Trick Flow® ignition wires. Available in spiral core versions, these 8mm wires feature high-temperature silicone outer jackets and insulation, along with a fiberglass braid for more pull strength. They have both terminal ends installed.

Trick Flow® Decals
Decals that mean horsepower.
These Trick Flow® decals won't make your car go any faster, but they will let everyone know where you got all of that horsepower. They come available in multiple sizes and styles.

Trick Flow® 500 HP GenX™ Top-End Engine Kits for GM LS1
Easy LS1 upgrades from Trick Flow®.
Don't waste time trying to figure out which parts you need to get the performance you want--Trick Flow® has already done the work for you! These GenX™ Top-End engine kits for GM LS1 are designed and dyno-tested to deliver the performance you want for less than the cost of purchasing the parts separa...

Trick Flow® Carburetor Supercharger Kits
Pump up to 100 extra horses into your small block Chevy.
These Trick Flow® carburetor supercharger kits feature the bare-finished MP122 supercharger and a fuel system compatible with just about any 4-barrel carb. ...

Trick Flow® R-Series Intake Manifold Upper Plenums
High-flow intake manifold plenums from Trick Flow®.
Trick Flow® R-Series upper plenums will provide maximum horsepower from their large cross-section, long-runner design. Perfect for race and street/strip applications, Trick Flow® R-Series plenums feature 75mm or 90mm throttle body inlets and are available for both 5.0L and 351 Windsor applications.

Trick Flow® PowerPort® Cleveland 225 Cylinder Heads for Ford 351C, 351M/400
Designed for high performance street/strip engines!
With its free-breathing, canted valve cylinder head design, Ford's 351 Cleveland was an engine that made big promises. The 2V version featured small-port cylinder heads optimized for low-speed torque. The 4V engines, however, had heads with huge intake ports that boosted top-end horsepower. What For...

Trick Flow® A460 18-Bolt Cylinder Head Fastener Conversion Kits
Easy installation for your Trick Flow® A460 cylinder heads.
These Trick Flow® A460 18-bolt cylinder head fastener conversion kits include the necessary parts to complete the installation of A460 18-bolt cylinder heads. They feature a black oxide finish that protects them from wear and corrosion. ...

Trick Flow® R-Series Intake Manifolds for Big Block Chevy
Trick Flow® intake manifolds made just for racing.
The Trick Flow® R-Series rectangular port intake manifolds for 500+ cubic inch big block Chevy engines are designed for maximum power delivery between 3,500 and 8,000 rpm--right where it's needed the most. These single-plane intake manifolds feature high-flowing extended runners and a raised plenum ...

Trick Flow® Embroidered Sweatshirts
Stay warm with Trick Flow®!
These Trick Flow® sweatshirts proudly display an embroidered Trick Flow® logo on the front. Made from 100 percent American-made NuBlend fleece (50 percent cotton/50 percent polyester), they're sure to keep you warn on those chilly days at the track or around the house.